There are 398 products.
Graves Motorsports Fairing Bracket - Standard Tach Graves Motorsports Yamaha R1 Fairing Bracket - Standard Tach. Graves Motorsports 00-01 R1 Fairing Brackets are fabricated from lightweight aluminum to maximize strength and minimize weight. All fairing brackets are hand welded in a fixed jig to ensure a precise fit and finish. These fairing brackets are designed for track use only and are not designed to support headlights or...
Graves Motorsports 43mm Steering Damper Clamp Features: 43mm damper clamp To be used with FB037ST fairing bracket
Graves Right Side Engine Case Cover Features: CNC machined 6061 billet aluminum Adds protection and style
Graves Motorsports Smog Block Off Plates Graves Motorsports smog block off plates for Yamaha sport bikes. Graves Motorsports smog block off plates are designed to seal off the ports on the valve cover used by the air injection system (a.k.a smog pumps or AIS). The air induction system (AIS) burns unburned exhaust gases by injecting fresh air (secondary air) into the exhaust port, reducing the emission of hydrocarbons. Once these are capped off the...
Graves Fender Eliminator Kit Graves Motorsports fender eliminators kits are designed to eliminate the stock rear fender to give the bike a more race inspired look. All Graves Motorsports fender eliminator kits are fabricated from black anodized aluminum for long term reliability and great looks. There is no cutting required to your stock fender and all hardware is included for easy installation. Include mounts to accept OEM turn signals.
Graves Fender Eliminator Kit No Signal Mounts Graves Motorsports fender eliminators kits are designed to eliminate the stock rear fender to give the bike a more race inspired look. All Graves Motorsports fender eliminator kits are fabricated from black anodized aluminum for long term reliability and great looks. There is no cutting required to your stock fender and all hardware is included for easy installation. This version has no OEM signal mounts (pictured but not on the bike). Great for...
Graves Motorsports Full System Exhaust Graves precise engineering develops precision products that are designed to outlook, outperform and outlast. Designed for the elite rider seeking top of the line performance, fit, finish and value. Features: Carbon fiber silencers with titanium end cap Titanium header Weight 15.2 lbs
Graves Motorsports Velocity Stack Kit Features: 4 injection molded plastic intake stacks Mounts directly into the stock airbox without modification Designed to smooth out the power curve, increase horsepower throughout and improve fuel efficiency Power gains of 4 HP in the mid range and 2 HP at the top end
Graves Motorsports Smog Block Off Plates Graves Motorsports smog block off plates for the Kawasaki ZX10R. Graves Motorsports smog block off plates are designed to seal off the ports on the valve cover used by the air injection system (a.k.a smog pumps or AIS). The air induction system (AIS) burns unburned exhaust gases by injecting fresh air (secondary air) into the exhaust port, reducing the emission of hydrocarbons. Once these are capped...
Graves Motorsports 54mm Stepped Steering Damper Clamp Mount Features: Diameter 54mm Center to center 59.5mm Rise 13.6mm For aftermarket clip-on handlebars Fits all 54mm fork tubes
Graves Fender Eliminator Kit Graves Motorsports fender eliminators kits are designed to eliminate the stock rear fender to give the bike a more race inspired and streamlined look. All Graves Motorsports fender eliminator kits are fabricated from black anodized aluminum for long term reliability and great looks. There is no cutting required to your stock fender and all hardware is included for easy installation.
Graves Fender Eliminator Kit Graves Motorsports Honda CBR1000rr Fender Eliminator Kit. Graves Motorsports Fender Eliminators for the 06-07 CBR 1000 rrare designed to eliminate the stock rear fender to give the bike a more race inspired and streamlined look. The Graves tag kit has been designed to use stock or aftermarket turn signals. All Graves Motorsports fender eliminator kits are fabricated from black anodized aluminum for long...
Graves Fender Eliminator Kit Graves Motorsports fender eliminators kits are designed to eliminate the stock rear fender to give the bike a more race inspired and streamlined look. All Graves Motorsports fender eliminator kits are fabricated from black anodized aluminum for long term reliability and great looks. There is no cutting required to your stock fender and all hardware is included for easy installation.
Graves Motorsports Frame Sliders Designed to help protect motorcycle in the event of a low speed crash or tip over. Graves Frame slider kits are engineered on the race track for precise fitment. No modification to bodywork required.
Graves Motorsports Bar Ends Features: Machined from billet aluminum For OEM handlebars Polished or black anodized Sold as a set
Graves Motorsports Clutch Frame Sliders Designed to help protect the clutch area of your motorcycle in the event of a crash or tip over. Graves frame slider kits are engineered on the race track and have precise fitment.
Graves Fender Eliminator Kit Graves Motorsports Yamaha fender eliminator kit. Graves Motorsports fender eliminator kits are designed to eliminate the stock rear fender to give the bike a more race inspired and streamlined look. The Graves tag kit are designed for use with stock Yamaha rear turn signal or Graves signals (may require extending wire leads to fit on some years) when using the adjustable and removable turn signal mounting ears. All Graves Motorsports fender eliminator kits...
Graves Motorsports Seat Foam Super durable, 9.5mm thick textured dual layer seat foam has a high quality adhesive backing for easy installation. Each piece is water-jet cut in the ideal shape for the Yamaha R6 in race trim but will also fit other models. This lightweight seat foam has been developed to provide the best balance of grip and rider maneuverability possible. The seat foam can easily be trimmed using a razor blade or shaped using a sanding pad.
Graves Motorsports Steering Damper Mount This damper mount requires the removal of the key switch. This must be done in order for the steering damper to mount properly. The key switch will have to be replaced with a toggle switch mounted on the fairing bracket. Graves Motorsports does not provide instructions or tech support on how to relocate and rewire the switch. This damper mount is designed to be used with Ohlins 68mm steering damper. Note: Race use only.
Graves Motorsports Carbon Fiber Replacement Heel Guard - Left Side Replacement part for the Graves RS-06R6-KAF model R6 rearsets.
Graves Left Side Engine Case Cover Features: CNC machined 6061 billet aluminum Black anodized Adds protection and style
Graves Right Side Engine Case Cover Features: CNC machined 6061 billet aluminum Black anodized Adds protection and style
Graves Motorsports Smog Block Off Plates Graves Motorsports smog block off plates are designed to seal off the ports on the valve cover used by the air injection system (a.k.a smog pumps or AIS). The air induction system (AIS) burns unburned exhaust gases by injecting fresh air (secondary air) into the exhaust port, reducing the emission of hydrocarbons. Once these are capped off the air injection system can be safely removed. These smog block off...
Graves Motorsports Adjustable Rearsets Features: Billet aluminum M1 style footpegs Double roller bearings in the brake Shifter pivots Folding lever tips Carbon fiber heel guard, left side only Includes 302mm shift rod Reverse or standard shift pattern Quick Shifter Notes: If you are using reverse shift you will need to order the Shift Rod Sensor : Push Type and 168mm female Shift Rod If you are using standard shift you will need to order the Shift Rod Sensor...