Aprilia Pegaso 650 Strada Rapid Bike Evo
All RapidBike products
are for closed-course competition use only.
Kit including the
RapidBike Evo module and the USB cable and model specific wiring harness.
The Evo module manages up to 8 injectors and modulates the signal up to
two O2 sensors (up to 2 lambdas). The purpose of the O2 sensor (lambda)
modulation is to prevent the stock ECU from recognizing the adjustment
applied by the RapidBike module to the injection map without any further
attempts to re-set the stock parameters matching the criteria fixed by
the restrictive exhaust gas emission laws.
When riding the motorcycle, the self-adaptive feature
determines the automatic self-correction of the air/fuel ratio maps: this
active management is added up to the pre-set parameters. The adjustments
set by RapidBike EVO improve the engine efficiency in order to reach the
best performance.The self-correction process is set in multipoint technology
according to RPM and TPS, for the whole range of the engine working, even
when the original RPM limiter is raised (when available).
Modulating the stock O2 sensor (lambda) signal is a technology far more
advanced than the so called “O2 sensor eliminator” (or any
other similar device used by the competitors) since they send a static/constant
signal which is in conflict with the typical behavior of the lambda sensors,
therefore causing the main ECU to perceive such a constant signal as a
mistake to be corrected. Thanks to RapidBike exclusive technology for
the modulation of the stock lambda signal the main ECU considers this
behavior as standard, therefore it will not try to re-set the stock engine
The Evo module is universal (same as RACE module), this means that it
can be installed on all the motorcycle models available for (once it is
properly programmed using the professional software RapidBike Master PRO
(sold only to dealers/tuners).
It can remove the speed limiter and to increase the rpm limiter up to
1000 rpm more than the stock one (both features are not available for
all bike models).
It has an accelerator pump feature.
The Evo module’s most important benefit is the so-called Auto-adaptive
feature, that is the ability to correct automatically the injection map
adjustment by reading the signal of the stock O2 sensor (lambda) while
riding the bike.
QUICK SHIFT READY , Race and Evo systems are quick shift
ready which means no need to buy additional modules all you need is an
RB quick shift sensor.
The range of injection’s
adjustments is from -100% to +150% of the stock injection time. Can also
be adjusted manually during dyno tuning.
Installing new YOUTUNE
(optional accessories) controller in combination with EVO add-on module
allows to activate two additional functions:
Engine Braking Management
RPM control to maintain constant cruising, a very useful tool to ensure
constant speed, better comfort and increased safety.