Bayside Performance Canadian Flag

For Canada Shipping

The prices on this site (baysideperformance.ca) are in CA Dollars. All orders shipping to a Canadian address must be placed here.

Bayside Performance USA Flag

For USA & Worldwide Shipping

To visit our USA and Worldwide site, click here. You'll be redirected to baysideperformance.com, where the prices are in US Dollars.

Shop by Categories

Brands

Information

11-14 Thruxton Carrozzeria Forged Aluminum V-TRACK Wheel Set

Price :
Starting at: $3,448.50 Sale: $3,276.08
Free Shipping!





  • Model: TRITHR11VS
  • Manufactured by: Core Moto

Description

Carrozzeria V Track Forged Aluminium Wheel Set

25 years of top level motorcycle racing engineering experience lead to the development of the Carrozzeria V-Track wheel.
Keeping the Y-Spoke Design, the updated 10 spoke V-Track wheel is an evolution of the original 12 spoke V-Star wheel. The new V-Track is lighter than the original but just as strong.

As of 2016 Carrozzeria wheels are produced by Core Moto USA, further improvements have been and will continue to be made to component designs, application fitment and material finishes. Core Moto USA strives to make the best product possible.

Sprockets:
Bayside Performance recommends Drive Systems sprockets for all Core Moto applications but any sprocket that has the following measurements will work: 5 (10mm holes) with a PCD (Pitch Circle Diameter) of 100mm and a sprocket ID of 76mm.

Performance Difference:
Decreasing unsprung weight (weight below the suspension) and rotational mass greatly improves several responsive aspects of usable performance you can actually feel.

Wheel Information:
CAD Designed one piece proprietary Forged monolithic hub design. Carrozzeria wheels are true forged wheels, purpose built for performance. Rather than using a market available generic forged blank, Carrozzeria wheel forgings are specific to each model we offer. Although this limits the amount of spoke designs and sizes we can offer, it nets a better quality product overall. Each wheel starts out as an aluminum billet that does not resemble a wheel. This Billet is then heated and placed into a 6000 ton controlled Hydraulic constant pressure forge and roll machine, This creates the basic shape of the wheel profile. This process is highly controlled to distribute the grain of the metal in a way that optimizes the strength of the wheel requiring less material (weight) needed in the final product. Constant pressure forging creates a more controlled and repeatable product than traditional drop forging. After forging, the 90% forgings are turned and milled by robotic loaded CNC machines to remove material and give the wheel its final shape.

Made from wrought 6151-T6 aluminum/CNC Full Machining, 30,000 M/Ton Super Die Pressed - High Heat Forged

Super lightweight; Bare
V-Track front 6.1 lbs - Yamaha R1
V-Track single sided rear (Ducati) 7.4 lbs
V-Track 6.0 inch rear 9.1 lbs - Yamaha R1

Core Moto Bearings:
Equipped with high quality smooth rolling bearings from genuine top tier bearing manufacturers. Currently the availability of counterfeit bearings is a worldwide epidemic. Core Moto only sources genuine brand name bearings from top tier bearing distributors or factory direct to ensure tolerances and material compositions meet specifications. Core Moto bearings are in most cases larger and wider than stock for more stability. They also choose a bearing seal type that is suited for long service life when maintained properly. Ceramic bearings are available upon request as an upgrade. We only suggest using ceramic bearings or regularly maintained race bikes.

Cush Drive Bushings:
New wheels made by Core Moto come with serviceable 5 or 6 pot cylindrical Cush Drive System for High HP Applications. In 2016 Core Moto developed a new Cush drive bushing that has proven durability. Our new bushing is now a single bonded hardened steel and firmer compound rubber unit. If your wheels were made before Core Moto started producing Carrozzeria wheels in 2016, improved bushings can be ordered in our genuine replacement parts section or from your favorite Core Moto dealer. As of 2018 we have 3 bushing sizes, depending on wheel model.

Sprocket Carrier:
New 5 bolt anodized CNC aluminum sprocket carrier for Apex-6 models are .25lbs lighter than V-Track 6 bolt Carriers. Each comes with metal locking sprocket nuts and an installed steel bearing retaining ring and bearing for all models. Our sprocket studs are fully re designed, now made from 2205 Duplex stainless steel, yielding more strength and superior corrosion resistance. The drive stud head profile has been optimized to offer more engagement of the bushing system for even load distribution per unit.

Spacers And Distance Tubes:
Anodized CNC Alloy Spacers, Carriers and Distance Tubes pre installed in the wheel. Some spacers will be shipped uninstalled for wheel packing reasons, but will come with a diagram for easy placement. Each part is either laser or mechanically engraved with unique part numbers to identify the placement location. Most front wheel spacers are now fully captive on the front using oil seals and bearing captive on the rear.

Rotor Carriers:
Rotor carriers will be pre mounted (except S1000RR for packing reasons) with stainless steel hardware as to not interfere with modern wheel speed sensor pickups. All rotor carriers are designed to accept OEM or aftermarket equivalent brake rotor discs and rotor bolts. New carriers are designed to optimize weight savings while offering a very rigid mount

Speed Sensor Rings For ABS And TC:
Core Moto is now starting to incorporate their own speed sensor rings into the final product, allowing the customer to keep their sensor rings on their OEM wheels. Core Moto is the first in the industry to do this. This has not been fully implemented for all applications as they are adding them as they make new changes to the hardware. Some application will require reuse of both OEM rings while some applications may come with only one Core Moto Ring front or rear. Each application is different.

Unsprung weight:
Properly set up suspension allows the lower portions (swingarm, wheels and forks) to move rapidly with the bumps and dips in the road or track surface while keeping the main structure of the vehicle on a stable un interrupted path. In short reducing unsprung weight allows the suspension to work better by reducing the mass that needs to be controlled on compression and rebound, keeping the tire traction on the ground and the chassis stable.

Rotational mass:
Reducing rotational mass increases acceleration, decreases braking distances and improves handling. Lighter wheels decrease the amount of power needed to get the tires spinning. This also reduces the amount of braking power needed to slow down the spinning wheel down. Rapid transitions from acceleration to deceleration benefit greatly from lighter wheels. Gyroscopic force is also reduced with lighter wheels, improving handling by reducing the amount of force needed to tilt the spinning wheel axis side to side. The reduction of gyroscopic and rotational inertial forces are compounded by higher speeds.

Colors:
Anodized colors can vary from batch to batch. Wheel sets are paired as front and rear sets in the anodize process... Very slight shade differences from front to rear may be present, but will remain under a 5% range. In most cases this is undetectable when the wheels are mounted on the vehicle.

Valve Stems:
Each wheel will come with 90 degree aluminum valve stems installed.

Approved DOT (USA) & JWL (Japan)
One year limited warranty