Driven Racing D-Axis Motorcycle Grips Propietary 2 ply krayton gel design Anodized to increase durability Gel grip design for maximum comfort Open end design Made in the USA
Healtech Electronics Exhaust Servo Eliminator
Healtech Electronics Exhaust Servo Eliminator
Remove the bulky and heavy exhaust servo motor when replacing the end-can or the full exhaust system. Plus, it will get rid of the FI light coming up when disconnecting the servo motor.
Regain Useful Space While Shedding Weight
Healtech ESE will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.
Built-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module, either if you replace the exhaust system or add a fuel controller module (or both).
Plug ‘n Go Install
All ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride.
Apparel Exchange/Return Policy:
It is the responsibility of the customer to ensure correct and proper sizing when placing an order. There are no returns, cancellations or exchanges on any apparel, no exceptions. This includes apparel such as leather suits, jackets, pants, clothing, boots and gloves. If you have any questions regarding sizing, please refer to the manufacturers sizing charts or contact Bayside Performance for further assistance.
The following are final sale, no exchanges, cancellations or returns:
- Apparel And Protection
- Special Order Items
- Made To Order Items
- Race Bodywork
- Clearance Items
- Items Removed From Original Packaging
- Parts That Have Been Installed Or Attempted To Be Installed
Product Exchange/Return Policy:
If you would like to exchange a product, contact Bayside Performance within one (1) day upon the receipt of the sales order. All returns must be approved by Bayside Performance. Upon Bayside Performance approval for inspection of the returned product, Bayside Performance assigns a Return Authorization (RA) Number. The RA number is only for the product that Bayside Performance has approved for inspection.
Shipping costs of the returned product is the liability of the customer; Bayside Performance does not accept any collect on delivery (COD) shipments. The RA number must be clearly marked on the outside of the box; returns without the marked RA number will be refused and may be returned to the customer. All approved returns must received by Bayside Performance within ten (10) days of the RA number provided to the customer. Always send your item back Canada Post with tracking and email us the tracking number.
All returned merchandise must be in its original packaging with attached tags, instructions and in new condition. Both the product and packaging must be in new condition free from scratches, blemishes, tears or dents. It is the customer's responsibility to ensure the returning merchandise to Bayside Performance is adequately packaged, preventing any loss or damage to the returning product. Any parts that have been removed from the package or attempted to be installed are not returnable.
All claims for missing products must be made by the end of the next business day upon the receipt of the order, after that time Bayside Performance will not be liable for any shortages. All claims for damaged merchandise must be made to the shipping carrier; ensure that you keep all shipping cartons and all packaging materials for carrier inspection. It is the responsibility of the customer to initiate any claims with the carrier.
All returned merchandise to Bayside Performance is subject to a 20% restocking fee. All canceled orders are subject to a 20% restocking fee if the item has already been ordered in. Any purchases that are refused and returned to Bayside Performance are deemed non-deliverable and subject to a restocking fee, all shipping costs and possibly our final sale policy.
Shipping and insurance costs are non-refundable. If a refund is approved by Bayside Performance, the reimbursement of money will be issued to the customer in the same monetary form as the payment was made to Bayside Performance at the time of the purchase.
Bayside Performance specializes in custom order hard to get or made to
order items. Our website shows inventory two ways.
We are experiencing random Covid-19 lockdown related delays that are out of our control. We ask that you be patient during this time.
In stock items would be shipped same or next business day however inventory numbers are not a guarantee. If in stock items are not available to ship right away we would contact you with an estimate.
Available To Order:
Available to order items where not discontinued the last time manually checked.They may have estimated time in which they should leave our store but this is not a guarantee. Available to order items must arrive to us first and be checked prior to shipping to you. We do stock the most commonly sold items and have a decent inventory however many items have to be sourced at the time of sale from many different distributors. We would contact you with a delivery estimate before processing your order if the posted estimate was incorrect or was not posted.
Parts Fitment Guarantee:
Aftermarket parts do not always fit like OEM parts. Some aftermarket parts require modifications or fitment to work correctly. For example carbon fiber and race bodywork components often need trimming and modifications to fit correctly.
Bayside Performance only guarantees fitment of these parts if they are installed by a licensed tech with experience installing aftermarket parts. Bayside Performance reserves the right to investigate each fitment issue and decide whether the part is incorrect or incorrect installation is the problem. The customer is responsible to install parts correctly or hire a company with the skills to complete the work properly. Please call us for more details.
DID 520 ZVMX X-Ring Street/Race Chain D.I.D is the number one motorcycle chain in the world. D.I.D chains are used by factory races teams from all manufacturers in race series everywhere. D.I.D's engineers are continuously improving chain designs in order to handle the tremendous horsepower loads of today's high performance motorcycles. In developing the new DID ZVM-X series, D.I.D focused on "Rigidity." Traditionally, "Tensile Strength" has been the bench-mark to indicate...
Puig Z-Racing Double Bubble Windscreen Produced with high impact acrylic to give strength and flexibility 3mm thickness helps absorb vibration at high speeds Shaded lower section to hide cables behind the speedometer Double bubble design creates additional wind protection Z-Racing windscreens are tested in a virtual windtunnel, improving aerodynamics and wind protection
Stompgrip Volcano Tank Grips Feel more control of your motorcycle with the quick and easy addition on Stompgrip. Let your legs do the work and make your body position more effective because aggressive volcano profile bumps make gripping the bike easy. Features: Custom designed to fit each application Ultra-clear material shows bike graphics or black option gives a solid look More lower body grip and less upper body fatigue Non-abrasive material is easy on leathers Made in USA
Healtech Electronics SpeedoHealer V4.0 Harness Kit SH-U01 is a universal harness and requires cutting and splicing the wires. On most motorcycles the factory speedometer error can be as high as 10%. So even a modest gearing change can have the speedometer off by 15%. Changing the sprockets or tires will also result in higher odometer reading, decreasing the bike’s resale value without valid reason. The SpeedoHealer is an affordable, convenient and very simple way to sort these...
Pirelli Diablo Superbike Front Tire A tire exclusively for racetrack use, it constitutes a direct link between sporting users and the world of professional riders. All NHS (Not for Highway Service) motorcycle tires are only for pure racing and cannot be used on public roads. The official tire of the world Superbike championship dedicated to professional riders and to sporting users who are looking...
Dynojet Power Commander V Dynojet’s line of Power Commander fuel tuners are easy-to-use piggyback devices that can give your bike more speed, power, and fuel efficiency to create the perfect ride from speeding on the racetrack to long commutes. Optimize your motorcycle for any riding condition with the Power Commander V. This powerful fuel tuner is now available in a smaller size than ever before and can be connected to a computer through USB to track your progress. It can...
Driven Racing Engine Block Off Plates Engine block off plates will stop the annoying and possibly damaging backfires from occurring while allowing you to remove a few pounds in associated valves and hoses from your bike. On late model EFI bikes with 02 sensors the air injection system must be blocked as it will introduce additional oxygen into the system which will skew your 02 sensor's values and make it impossible to...
SC-Project CR-T Muffler The CR-T, a multiple World-champion muffler and the most representative of the SC-Project range is available in titanium and carbon variants and, depending on the model of motorcycle with the spectacular titanium flame arrester on the output. This iconic muffler guarantees record performance levels and lightness, the result of prototyping, technical and designing studies aimed at satisfying the most demanding requirements of the top teams and...
Healtech Electronics Steering Damper Eliminator The Steering Damper Eliminator will take care of the annoying FI light when removing the OEM electronic steering damper on modern sportbikes. If you are serious about racing then the factory electronic steering damper must be replaced too. However, disconnecting the factory damper from the bike’s main harness will instantly result in the FI light coming on (which could mask some serious bike/engine related faults). This is where the...
Healtech Electronics Pair System Eliminator Get rid of the annoying FI light coming on when removing or disconnecting the pair system from your motorcycle. The pair system on modern sport and street bikes injects fresh air to the exhaust. Doing so, it minimizes the amount of unburnt fuel getting to the atmosphere. This is why the popping occurs on heavy deceleration, as the unburnt fuel is combusting in the end can. Whether you just simply want to get rid of the popping, or...
Healtech Electronics Secondary Throttle Valve Eliminator Due to emission and noise control regulations secondary throttle valves appeared in motorcycles in the last decade. This secondary butterfly is controlled by the bike’s ECU. For maximum performance and crisp throttle response this secondary system is removed, mainly in drag racing / road racing. However, as soon as you disconnect the secondary throttle valve actuator motor from the bike’s main wiring harness, the FI light...