Description
Healtech Electronics SpeedoHealer V4.0
- For compatibility please refer to the Healtech Product Advisor below
On most motorcycles the factory speedometer error can be as high as 10%. So
even a modest gearing change can have the speedometer off by 15%. Changing the
sprockets or tires will also result in higher odometer reading, decreasing the
bike’s resale value without valid reason. The SpeedoHealer is an affordable,
convenient and very simple way to sort these speedo and odo issues. Compatible
with all motorcycles, ATVs/UTVs with non cable driven speedometer. The SpeedoHealer
is the most popular and most reliable calibrator in the world acknowledged by
thousands of happy customers worldwide.
Easy To Use User Interface
Easy to program, review and update the stored parameters.
Extended Calibration Range
-99.9% to +9999.9% in steps of 0.1% Which means the signal can be adjusted
from 1/1000 to x100, in increments of 0.001. This range is efficient even for
the most radical gearing changes and suitable for all kind of custom applications
as well.
Improved Top Speed
Can be used to remove the top speed limiter of the speed restricted motorcycles
and ATVs e.g. from Honda, Kawasaki, Yamaha, Can-Am.
Detachable Remote Button
The SpeedoHealer comes with a detachable remote button as standard for the
Top Speed Recall feature.
Dual-Bank Memory
Store two independent calibration values and switch between them by the press
of a button. There is a clear, visual confirmation of the active bank and value
in use. Useful for road & track setting when changing gearing or running
different sized wheels/tires.
Display Unit Conversion
Change from Km/h to MPH and vice versa by the press of a button.
Robust Design
100% weatherproof. Every unit is fully tested, guaranteed to work. All leads
are protected against reverse voltage, short circuits and high energy transients.
SpeedoHealer Special Models:
SH-V4-TSD
The SpeedoHealer TSD model has a Top Speed De-restrictor feature. It is inactive
by default. You may activate this feature only for racing purposes on closed
tracks, entirely at your own risk. It must not be used on public roads. This
unit can be configured to avoid the top speed restriction on motorcycles and
ATVs which have a top-speed limitation based on the speed signal. You can set
the TSD unit to either ‘freeze’ the speed signal to the ECU at a
specific threshold, or apply a stronger calibration value so that the speed
signal will be increased at a slower rate above the set threshold.
The SH-V4-TSD unit is compatible with all SH-V4 harness kits.
SH-V4-AB
The difference between the standard SH-V4 and SH-V4-AB is that the standard
model has a remote push button for top speed recall, while the AB model has
a remote switch which allows INSTANT switching (even while riding) between the
A and B memory banks. The SH-V4-AB unit is compatible with all SH-V4 harness
kits.
SH-V4-C / SH-V4-2WA
These modules have the exact same features as the standard SH-V4 module but
work with different speed sensor type. Healtech Product Advisor shows the exact
part numbers you need for your bike. Motorcycles for which are listed SH-V4-C
or SH-V4-2WA modules, can not use the SH-V4, SH-V4-TSD or SH-V4-AB modules.
SH-V4-2W
This SpeedoHealer model is suited for vehicles with 2-wire inductive sensor.
If you are not sure about compatibility, please contact Healtech direct. It
is sold as a complete kit and splicing is necessary.
Apparel Exchange/Return Policy:
It is the responsibility of the customer to ensure correct and proper sizing
when placing an order. There are no returns, cancellations or exchanges on any
apparel, no exceptions. This includes apparel such as leather suits, jackets,
pants, clothing, boots and gloves. If you have any questions regarding sizing,
please refer to the manufacturers sizing charts or contact Bayside Performance
for further assistance.
The following are final sale, no exchanges, cancellations or returns:
- Helmets
- Apparel And Protection
- Special Order Items
- Made To Order Items
- Electrical
- Race Bodywork
- Clearance Items
- Items Removed From Original Packaging
- Parts That Have Been Installed Or Attempted To Be Installed
Product Exchange/Return Policy:
If you would like to exchange a product, contact Bayside Performance within
one (1) day upon the receipt of the sales order. All returns must be approved
by Bayside Performance. Upon Bayside Performance approval for inspection of
the returned product, Bayside Performance assigns a Return Authorization (RA)
Number. The RA number is only for the product that Bayside Performance has approved
for inspection.
Shipping costs of the returned product is the liability of the customer; Bayside
Performance does not accept any collect on delivery (COD) shipments. The RA
number must be clearly marked on the outside of the box; returns without the
marked RA number will be refused and may be returned to the customer. All approved
returns must received by Bayside Performance within ten (10) days of the RA
number provided to the customer. Always send your item back Canada Post with
tracking and email us the tracking number.
All returned merchandise must be in its original packaging with attached tags,
instructions and in new condition. Both the product and packaging must be in
new condition free from scratches, blemishes, tears or dents. It is the customer's
responsibility to ensure the returning merchandise to Bayside Performance is
adequately packaged, preventing any loss or damage to the returning product.
Any parts that have been removed from the package or attempted to be installed
are not returnable.
All claims for missing products must be made by the end of the next business
day upon the receipt of the order, after that time Bayside Performance will
not be liable for any shortages. All claims for damaged merchandise must be
made to the shipping carrier; ensure that you keep all shipping cartons and
all packaging materials for carrier inspection. It is the responsibility of
the customer to initiate any claims with the carrier.
All returned merchandise to Bayside Performance is subject to a 20% restocking
fee. All canceled orders are subject to a 20% restocking fee if the item has
already been ordered in. Any purchases that are refused and returned to Bayside
Performance are deemed non-deliverable and subject to a restocking fee, all
shipping costs and possibly our final sale policy.
Shipping and insurance costs are non-refundable. If a refund is approved by
Bayside Performance, the reimbursement of money will be issued to the customer
in the same monetary form as the payment was made to Bayside Performance at
the time of the purchase.
Inventory:
Bayside Performance specializes in custom order hard to get or made to
order items. Our website shows inventory two ways.
We are experiencing random Covid-19 lockdown related delays that are out of our control. We ask that you be patient during this time.
In Stock:
In stock items would be shipped same or next business day however
inventory numbers are not a guarantee. If in stock items are not
available to ship right away we would contact you with an estimate.
Available To Order:
Available to order items where not discontinued the last time manually
checked.They may have estimated time in which they should leave our
store but this is not a guarantee. Available to order items must arrive
to us first and be checked prior to shipping to you. We do stock the
most commonly sold items and have a decent inventory however many items
have to be sourced at the time of sale from many different distributors.
We would contact you with a delivery estimate before processing your
order if the posted estimate was incorrect or was not posted.
Parts Fitment Guarantee:
Aftermarket parts do not always fit like OEM parts. Some aftermarket parts
require modifications or fitment to work correctly. For example carbon fiber
and race bodywork components often need trimming and modifications to fit
correctly.
Bayside Performance only guarantees fitment of these parts if they are installed
by a licensed tech with experience installing aftermarket parts. Bayside Performance
reserves the right to investigate each fitment issue and decide whether the
part is incorrect or incorrect installation is the problem. The customer is
responsible to install parts correctly or hire a company with the skills to
complete the work properly. Please call us for more details.
