SH-U01 is a universal harness and requires cutting and splicing the wires.
On most motorcycles the factory speedometer error can be as high as 10%. So
even a modest gearing change can have the speedometer off by 15%. Changing the
sprockets or tires will also result in higher odometer reading, decreasing the
bike’s resale value without valid reason. The SpeedoHealer is an affordable,
convenient and very simple way to sort these speedo and odo issues. Compatible
with all motorcycles, ATVs/UTVs with non cable driven speedometer. The SpeedoHealer
is the most popular and most reliable calibrator in the world acknowledged by
thousands of happy customers worldwide.
For compatibility please refer to the Healtech Product Advisor
It is the responsibility of the customer to ensure correct and proper sizing
when placing an order. There are no returns, cancellations or exchanges on any
apparel, no exceptions. This includes apparel such as leather suits, jackets,
pants, clothing, boots and gloves. If you have any questions regarding sizing,
please refer to the manufacturers sizing charts or contact Bayside Performance
for further assistance.
The following are final sale, no exchanges, cancellations or returns:
Helmets
Apparel And Protection
Special Order Items
Made To Order Items
Electrical
Race Bodywork
Clearance Items
Items Removed From Original Packaging
Parts That Have Been Installed Or Attempted To Be Installed
Product Exchange/Return Policy:
If you would like to exchange a product, contact Bayside Performance within
one (1) day upon the receipt of the sales order. All returns must be approved
by Bayside Performance. Upon Bayside Performance approval for inspection of
the returned product, Bayside Performance assigns a Return Authorization (RA)
Number. The RA number is only for the product that Bayside Performance has approved
for inspection.
Shipping costs of the returned product is the liability of the customer; Bayside
Performance does not accept any collect on delivery (COD) shipments. The RA
number must be clearly marked on the outside of the box; returns without the
marked RA number will be refused and may be returned to the customer. All approved
returns must received by Bayside Performance within ten (10) days of the RA
number provided to the customer. Always send your item back Canada Post with
tracking and email us the tracking number.
All returned merchandise must be in its original packaging with attached tags,
instructions and in new condition. Both the product and packaging must be in
new condition free from scratches, blemishes, tears or dents. It is the customer's
responsibility to ensure the returning merchandise to Bayside Performance is
adequately packaged, preventing any loss or damage to the returning product.
Any parts that have been removed from the package or attempted to be installed
are not returnable.
All claims for missing products must be made by the end of the next business
day upon the receipt of the order, after that time Bayside Performance will
not be liable for any shortages. All claims for damaged merchandise must be
made to the shipping carrier; ensure that you keep all shipping cartons and
all packaging materials for carrier inspection. It is the responsibility of
the customer to initiate any claims with the carrier.
All returned merchandise to Bayside Performance is subject to a 20% restocking
fee. All canceled orders are subject to a 20% restocking fee if the item has
already been ordered in. Any purchases that are refused and returned to Bayside
Performance are deemed non-deliverable and subject to a restocking fee, all
shipping costs and possibly our final sale policy.
Shipping and insurance costs are non-refundable. If a refund is approved by
Bayside Performance, the reimbursement of money will be issued to the customer
in the same monetary form as the payment was made to Bayside Performance at
the time of the purchase.
Inventory:
Bayside Performance specializes in custom order hard to get or made to
order items. Our website shows inventory two ways.
We are experiencing random Covid-19 lockdown related delays that are out of our control. We ask that you be patient during this time.
In Stock:
In stock items would be shipped same or next business day however
inventory numbers are not a guarantee. If in stock items are not
available to ship right away we would contact you with an estimate.
Available To Order:
Available to order items where not discontinued the last time manually
checked.They may have estimated time in which they should leave our
store but this is not a guarantee. Available to order items must arrive
to us first and be checked prior to shipping to you. We do stock the
most commonly sold items and have a decent inventory however many items
have to be sourced at the time of sale from many different distributors.
We would contact you with a delivery estimate before processing your
order if the posted estimate was incorrect or was not posted.
Parts Fitment Guarantee:
Aftermarket parts do not always fit like OEM parts. Some aftermarket parts
require modifications or fitment to work correctly. For example carbon fiber
and race bodywork components often need trimming and modifications to fit
correctly.
Bayside Performance only guarantees fitment of these parts if they are installed
by a licensed tech with experience installing aftermarket parts. Bayside Performance
reserves the right to investigate each fitment issue and decide whether the
part is incorrect or incorrect installation is the problem. The customer is
responsible to install parts correctly or hire a company with the skills to
complete the work properly. Please call us for more details.
Healtech Electronics Exhaust Servo Eliminator
Remove the bulky and heavy exhaust servo motor when replacing the end-can or
the full exhaust system. Plus, it will get rid of the FI light coming up when
disconnecting the servo motor.
Regain Useful Space While Shedding Weight
Healtech ESE will eliminate the bulky, heavy and space wasting OEM servo motor
with the operating cables and wiring, which can save up to 1 kg and frees up
a lot of under seat storage. Also, you may now get rid...
CRG Arrow
Mirror
The CRG Arrow Bar
End Mirror is the ideal application for modern, performance sportbikes
and naked sportbikes. Aerodynamic styling in billet aluminum construction
gives a superior, unobstructed view of the road behind. In keeping with
the exceptional quality of all CRG products, the Arrow Bar End Mirror
is an eloquent and minimalist design.
Sold each
Driven Racing
Engine Block Off Plates
Engine block off plates
will stop the annoying and possibly damaging backfires from occurring
while allowing you to remove a few pounds in associated valves and hoses
from your bike.
On late model EFI bikes with 02 sensors the air injection system must be blocked
as it will introduce additional oxygen into the system which will skew your
02 sensor's values and make it impossible to get a correct...
Pitbull Hybrid
One Armed Rear Stand for Honda CB1000R, Hawk and VFR800
Our new Hybrid One
Armed features a removable handle which allows you to use the stand with
the handle going either forward or toward the rear of the bike. The handle
can be installed going either to the front or back on the drive side,
but cannot be used on the non-drive side of these motorcycles.When installed on
the drive side, it allows wheel removal. It...
Driven
Racing Steel Rear Sprocket
Driven rear sprockets
are made out of case hardened chromoly steel and machined to exact dimensions
Heat treated for
greater surface strength
Hard anodized for
protection against corrosion
All sprockets are
machined to tolerances no greater than 0.2mm, which is less than half
OEM standards
K&N Street Air Filter
K&N's high-flow air filters are available as a replacement for your stock
motorcycle air filter element. They are custom engineered to fit your specific
application and are designed to provide low restriction and increased performance,
while providing excellent engine protection for your motorcycle.
Features:
Designed to provide increased horsepower and torque
Pleated media provides a large filtration area offering long service intervals...
Graves Motorsports Smog Block Off Plates
Graves Motorsports smog block off plates are designed to seal off the ports
on the valve cover used by the air injection system (a.k.a smog pumps or AIS).
The air induction
system (AIS) burns unburned exhaust gases by injecting fresh air (secondary
air) into the exhaust port, reducing the emission of hydrocarbons.
Once these are capped
off the air injection system can be safely removed. These smog block...
Drive Systems
Superlite XD Series Chromoly Steel Front Race Sprocket
Superlite "Xtreme
Duty" front sprockets are manufactured to be the lightest and most
durable countershaft sprockets available today.
Superlite front
sprockets are made from case hardened chromoly steel to exact tolerances
and the exclusive tooth profile offers a precise fitment over other
brands.
Most...
JT Sprockets
JT sprockets are
made using only the best available materials.
JT Steel Sprockets
are manufactured using only the finest grade of C49 high carbon steel
for the rear sprockets, and SCM420 chromoly steel alloy for the front
sprockets
Aluminium racing
rear sprockets are made from advanced aviation-grade 7075-T6 aluminium
alloy, optimal lightweight design and CNC...
Puig Z-Racing Double Bubble Windscreen
Produced with high impact acrylic to give strength and flexibility
3mm thickness helps absorb vibration at high speeds
Shaded lower section to hide cables behind the speedometer
Double bubble design creates additional wind protection
Z-Racing windscreens are tested in a virtual windtunnel, improving aerodynamics and wind protection
Healtech Electronics SpeedoHealer V4.0 Harness Kit
SH-U01 is a universal harness and requires cutting and splicing the wires.
On most motorcycles the factory speedometer error can be as high as 10%. So
even a modest gearing change can have the speedometer off by 15%. Changing the
sprockets or tires will also result in higher odometer reading, decreasing the
bike’s resale value without valid reason. The SpeedoHealer is an affordable,
convenient and very simple way to sort these...
Healtech Electronics SpeedoHealer V4.0 Harness Kit
SH-U01 is a universal harness and requires cutting and splicing the wires.
On most motorcycles the factory speedometer error can be as high as 10%. So
even a modest gearing change can have the speedometer off by 15%. Changing the
sprockets or tires will also result in higher odometer reading, decreasing the
bike’s resale value without valid reason. The SpeedoHealer is an affordable,
convenient and very simple way to sort these...
Healtech Electronics SpeedoHealer V4.0 Control Unit
For compatibility please refer to the Healtech Product Advisor below
Requires SpeedoHealer harness kit, sold separately
On most motorcycles the factory speedometer error can be as high as 10%. So
even a modest gearing change can have the speedometer off by 15%. Changing the
sprockets or tires will also result in higher odometer reading, decreasing the
bike’s resale value without valid reason. The SpeedoHealer is an affordable,...
Healtech Electronics SpeedoHealer V4.0 Harness Kit
SH-U01 is a universal harness and requires cutting and splicing the wires.
On most motorcycles the factory speedometer error can be as high as 10%. So
even a modest gearing change can have the speedometer off by 15%. Changing the
sprockets or tires will also result in higher odometer reading, decreasing the
bike’s resale value without valid reason. The SpeedoHealer is an affordable,
convenient and very simple way to sort these...
Healtech Electronics SpeedoHealer V4.0 Harness Kit
SH-U01 is a universal harness and requires cutting and splicing the wires.
On most motorcycles the factory speedometer error can be as high as 10%. So
even a modest gearing change can have the speedometer off by 15%. Changing the
sprockets or tires will also result in higher odometer reading, decreasing the
bike’s resale value without valid reason. The SpeedoHealer is an affordable,
convenient and very simple way to sort these...
Healtech Electronics SpeedoHealer V4.0 Harness Kit
SH-U01 is a universal harness and requires cutting and splicing the wires.
On most motorcycles the factory speedometer error can be as high as 10%. So
even a modest gearing change can have the speedometer off by 15%. Changing the
sprockets or tires will also result in higher odometer reading, decreasing the
bike’s resale value without valid reason. The SpeedoHealer is an affordable,
convenient and very simple way to sort these...
Healtech Electronics SpeedoHealer V4.0 Harness Kit
SH-U01 is a universal harness and requires cutting and splicing the wires.
On most motorcycles the factory speedometer error can be as high as 10%. So
even a modest gearing change can have the speedometer off by 15%. Changing the
sprockets or tires will also result in higher odometer reading, decreasing the
bike’s resale value without valid reason. The SpeedoHealer is an affordable,
convenient and very simple way to sort these...
Healtech Electronics SpeedoHealer V4.0 Harness Kit
SH-U01 is a universal harness and requires cutting and splicing the wires.
On most motorcycles the factory speedometer error can be as high as 10%. So
even a modest gearing change can have the speedometer off by 15%. Changing the
sprockets or tires will also result in higher odometer reading, decreasing the
bike’s resale value without valid reason. The SpeedoHealer is an affordable,
convenient and very simple way to sort these...
Healtech Electronics SpeedoHealer V4.0 Harness Kit
SH-U01 is a universal harness and requires cutting and splicing the wires.
On most motorcycles the factory speedometer error can be as high as 10%. So
even a modest gearing change can have the speedometer off by 15%. Changing the
sprockets or tires will also result in higher odometer reading, decreasing the
bike’s resale value without valid reason. The SpeedoHealer is an affordable,
convenient and very simple way to sort these...