Includes only the pin for a one armed rear stand for the bike selected.
To find the right Pin/Adapter for your bike model please check the Pitbull
Rear Stand Fitting Chart
Note: May fit other models, but the restraint system has only been tested
on the listed models.
B Pin: BMW
Single sided swing arm pin
B8 Pin: BMW
F800S/ST with single-sided swingarm specific.
D Pin: Fits
all LH side Ducati single sided swing arms except1098, 1198, 1199, 1299, Diavel, Multistrada 1200, or Streetfighter 1098/1198.
DR Pin: Fits
all RH side Ducati single sided swing arms except
1098, 1198, 1199, 1299, Diavel, Multistrada 1200, or Streetfighter
1098/1198.
H Pin: Honda
CBR1000R, Hawk, and VFR models.
H2/H2R Pin:
Fits Kawasaki H2/H2R motorcycles.
K Pin: Pin
for LH side of KTM1290..
RH/1098 MV Pin:
1098/MV pin (approximately 43mm). This pin works on large hub Ducati's
on the RIGHT side and on MV Agusta's on BOTH sides. Check your LEFT side
axle hole on the '07 1098 to determine whether you need this pin or the
other version (1098L / F0099-003), which is approximately 41mm. Will also
fit RH side of KTM1290.
T Pin: Pin
for LH side of Triumphs with single sided swingarms.
TR Pin: Pin
for RH side of Triumphs with single sided swingarms.
R Pin: Honda
Exotics models.
RS Pin: Honda
RS250 and NSR250 models.
1098L Pin:
1098L pin (approximately 41mm). Check your LEFT side axle hole on the
1098 to determine whether you need this pin or the other version (RH1098
MV / F0099-004), which is approximately 43mm. Fits left side of all 1198,
Panigale, Multistrada 1200 models
It is the responsibility of the customer to ensure correct and proper sizing
when placing an order. There are no returns, cancellations or exchanges on any
apparel, no exceptions. This includes apparel such as leather suits, jackets,
pants, clothing, boots and gloves. If you have any questions regarding sizing,
please refer to the manufacturers sizing charts or contact Bayside Performance
for further assistance.
The following are final sale, no exchanges, cancellations or returns:
Helmets
Apparel And Protection
Special Order Items
Made To Order Items
Electrical
Race Bodywork
Clearance Items
Items Removed From Original Packaging
Parts That Have Been Installed Or Attempted To Be Installed
Product Exchange/Return Policy:
If you would like to exchange a product, contact Bayside Performance within
one (1) day upon the receipt of the sales order. All returns must be approved
by Bayside Performance. Upon Bayside Performance approval for inspection of
the returned product, Bayside Performance assigns a Return Authorization (RA)
Number. The RA number is only for the product that Bayside Performance has approved
for inspection.
Shipping costs of the returned product is the liability of the customer; Bayside
Performance does not accept any collect on delivery (COD) shipments. The RA
number must be clearly marked on the outside of the box; returns without the
marked RA number will be refused and may be returned to the customer. All approved
returns must received by Bayside Performance within ten (10) days of the RA
number provided to the customer. Always send your item back Canada Post with
tracking and email us the tracking number.
All returned merchandise must be in its original packaging with attached tags,
instructions and in new condition. Both the product and packaging must be in
new condition free from scratches, blemishes, tears or dents. It is the customer's
responsibility to ensure the returning merchandise to Bayside Performance is
adequately packaged, preventing any loss or damage to the returning product.
Any parts that have been removed from the package or attempted to be installed
are not returnable.
All claims for missing products must be made by the end of the next business
day upon the receipt of the order, after that time Bayside Performance will
not be liable for any shortages. All claims for damaged merchandise must be
made to the shipping carrier; ensure that you keep all shipping cartons and
all packaging materials for carrier inspection. It is the responsibility of
the customer to initiate any claims with the carrier.
All returned merchandise to Bayside Performance is subject to a 20% restocking
fee. All canceled orders are subject to a 20% restocking fee if the item has
already been ordered in. Any purchases that are refused and returned to Bayside
Performance are deemed non-deliverable and subject to a restocking fee, all
shipping costs and possibly our final sale policy.
Shipping and insurance costs are non-refundable. If a refund is approved by
Bayside Performance, the reimbursement of money will be issued to the customer
in the same monetary form as the payment was made to Bayside Performance at
the time of the purchase.
Inventory:
Bayside Performance specializes in custom order hard to get or made to
order items. Our website shows inventory two ways.
We are experiencing random Covid-19 lockdown related delays that are out of our control. We ask that you be patient during this time.
In Stock:
In stock items would be shipped same or next business day however
inventory numbers are not a guarantee. If in stock items are not
available to ship right away we would contact you with an estimate.
Available To Order:
Available to order items where not discontinued the last time manually
checked.They may have estimated time in which they should leave our
store but this is not a guarantee. Available to order items must arrive
to us first and be checked prior to shipping to you. We do stock the
most commonly sold items and have a decent inventory however many items
have to be sourced at the time of sale from many different distributors.
We would contact you with a delivery estimate before processing your
order if the posted estimate was incorrect or was not posted.
Parts Fitment Guarantee:
Aftermarket parts do not always fit like OEM parts. Some aftermarket parts
require modifications or fitment to work correctly. For example carbon fiber
and race bodywork components often need trimming and modifications to fit
correctly.
Bayside Performance only guarantees fitment of these parts if they are installed
by a licensed tech with experience installing aftermarket parts. Bayside Performance
reserves the right to investigate each fitment issue and decide whether the
part is incorrect or incorrect installation is the problem. The customer is
responsible to install parts correctly or hire a company with the skills to
complete the work properly. Please call us for more details.
Pitbull Front Stand Pins And Adapters
Pins provide the correct fit for Newfront, Forklift, Converter, and Standard
Front Stands. The pins are bike-specific. Some bikes also require the use of
a pin adapter. Refer to the chart below for the proper fitment.
Pit
Bull Front Stand Fitting Chart
Pitbull Hybrid
Swivels - Pair
Converts a Hybrid Headlift stand to be able to lift from
the bottom of the forks.Note: This will not convert
Newfront (F0031-000) model to be able to lift from the forks. It will
only work with the 2012 Hybrid Front Stand.
New Rage Cycles LED Block Off Turn Signals
Features:
Plug & Play LED turn signals
Powder coated brackets
Full encased and weather proofed LED lenses
Pitbull
Ducati Hybrid One Armed Rear Stand
Ducati Hybrid One
Armed features a removable handle which allows you to use the stand with
the handle going either forward or toward the rear of the bike. The handle
can be installed going either to the front or back on the drive side,
but only to the rear on the non-drive side of most motorcycles.When installed on
the drive side, it allows wheel removal; when installed on the non-drive...
SC-Project S1 Muffler
The S1 muffler, a benchmark for the Superbike World Championship, is available
with a titanium tapered body and matte carbon fiber end cap and, depending on
the model of motorcycle with the spectacular titanium flame arrester on the
output.
The S1 muffler fuses a racing style with valued technical solutions such as
bracket and fitting welding with T.I.G. technology or titanium insert bushings
machined from solid by CNC machines, which guarantee...
Pitbull Trailer
Restraint Replacement Pin Fitting
Includes only the
pin fitting hardware for the bike selected. Pit Bull Fitting Chart
*Note:
Part number F0075X-001 Does not fit K1600 or R1200RT
models due to pipe interference. Does not fit R9T model with low exhaust (because
it blocks access to hole)
*Note:
Honda CBR250R require aftermarket exhaust system, does not fit with stock
exhaust.
*Note:...
Pit Bull Caliper Holders
Caliper holders for use with Pit Bull hybrid headlift front stands. These allow
you to store your calipers and most caliper bolts out of the way and not leave
them dangling or zip-tied.
Works with all Pit Bull hybrid headlift stands made since fall 2018 and 95%
of Pit Bull hybrid headlift stands made since 2012.
Check for the presence of the welded-on "bung" on your front stands
upper chassis before ordering.
Sold as a pair
Pitbull Axle
Holder for Front/Rear Stands
Our Axle Holder gives
you a place to store your axle when it is removed from your motorcycle.
The Axle Holder can be mounted to either side of the stand and the angle
is adjustable to suit your needs.
Pit
Bull Ducati 749/999 Rear Stand Top Supports
These top supports
are tailored to fit Ducati 999s and 749s that do not accept spools. They
are made to lift the bikes without interfering with axle removal.
Sold as a pair
Pit
Bull Top Supports GP Style Rear Stand
These top supports
are tailored to fit motorcycles with a GP style inverted "V"
instead of traditional spool mounts. The top support has a "spool"
mounted to it to lift from the inverted "V".
Sold as a pair
Pitbull
Replacement Pads Standard Rear Set
Replacement rubber pads and plastic swingarm guards for
rear stands. Works on Standard Rear, SS Rear and Forward Handle Standard
Rear. Must be attached with adhesive.
Pitbull Dirt Bike Swivels
These Swivels will allow you to converter Pit Bull hybrid front stand into
a stand to lift your dirt bike safely. Two rubber covered pegs on either side
of the bike locate under the swingarms for support while a third peg . It's
design allows peg on either side locates behind the swingarms to prevent slippage.
Includes only the dirt bike swivels, washers and retainer rings to secure these
to a hybrid front stand.
Pit
Bull Top Supports Standard Rear Stand Standard
Top Supports lift from under the swingarm. Rubber pads have ridges to
help them grip.
Sold as a pair
Pitbull Hybrid Swivel ABS Friendly - Right Side Only
Accommodates some motorcycles with the ABS sensor that blocks proper access
to the back side of the right side fork when using Pit Bull traditional hybrid
swivels.
Designed specifically for the 2013+ Suzuki Hayabusa ABS and 2017+ Suzuki GSXR1000
but may fit other models. Use on other models at your own risk.
Pitbull Front Stand Pins And Adapters
Pins provide the correct fit for Newfront, Forklift, Converter, and Standard
Front Stands. The pins are bike-specific. Some bikes also require the use of
a pin adapter. Refer to the chart below for the proper fitment.
Pit
Bull Front Stand Fitting Chart
Pitbull Hybrid
Swivels - Pair
Converts a Hybrid Headlift stand to be able to lift from
the bottom of the forks.Note: This will not convert
Newfront (F0031-000) model to be able to lift from the forks. It will
only work with the 2012 Hybrid Front Stand.
Pit
Bull Top Supports - SS Rear Stand
These top supports
flip over to fit bikes that do and do not use spools. They come in handy
at the track if a spool mount is broken off in a crash.
Sold as a pair