
EK 3D 520Z Series Supersport Rivet Master Link
EK 3D 520Z Series Supersport Rivet Master Link Rivet style master link for EK 3D 520Z chain.
Pitbull Trailer Restraint Replacement Pin Fitting
Includes only the pin fitting hardware for the bike selected.
*Note: Part number F0075X-001 Does not fit K1600 or R1200RT models due to pipe interference. Does not fit R9T model with low exhaust (because it blocks access to hole)
*Note:
Honda CBR250R require aftermarket exhaust system, does not fit with stock
exhaust.
*Note: Known bike fitments are listed in the drop down
menu. May fit other models, but the restraint system has only been tested
on the listed models.
Apparel Exchange/Return Policy:
It is the responsibility of the customer to ensure correct and proper sizing when placing an order. There are no returns, cancellations or exchanges on any apparel, no exceptions. This includes apparel such as leather suits, jackets, pants, clothing, boots and gloves. If you have any questions regarding sizing, please refer to the manufacturers sizing charts or contact Bayside Performance for further assistance.
The following are final sale, no exchanges, cancellations or returns:
Product Exchange/Return Policy:
If you would like to exchange a product, contact Bayside Performance within one (1) day upon the receipt of the sales order. All returns must be approved by Bayside Performance. Upon Bayside Performance approval for inspection of the returned product, Bayside Performance assigns a Return Authorization (RA) Number. The RA number is only for the product that Bayside Performance has approved for inspection.
Shipping costs of the returned product is the liability of the customer; Bayside Performance does not accept any collect on delivery (COD) shipments. The RA number must be clearly marked on the outside of the box; returns without the marked RA number will be refused and may be returned to the customer. All approved returns must received by Bayside Performance within ten (10) days of the RA number provided to the customer. Always send your item back Canada Post with tracking and email us the tracking number.
All returned merchandise must be in its original packaging with attached tags, instructions and in new condition. Both the product and packaging must be in new condition free from scratches, blemishes, tears or dents. It is the customer's responsibility to ensure the returning merchandise to Bayside Performance is adequately packaged, preventing any loss or damage to the returning product. Any parts that have been removed from the package or attempted to be installed are not returnable.
All claims for missing products must be made by the end of the next business day upon the receipt of the order, after that time Bayside Performance will not be liable for any shortages. All claims for damaged merchandise must be made to the shipping carrier; ensure that you keep all shipping cartons and all packaging materials for carrier inspection. It is the responsibility of the customer to initiate any claims with the carrier.
All returned merchandise to Bayside Performance is subject to a 20% restocking fee. All canceled orders are subject to a 20% restocking fee if the item has already been ordered in. Any purchases that are refused and returned to Bayside Performance are deemed non-deliverable and subject to a restocking fee, all shipping costs and possibly our final sale policy.
Shipping and insurance costs are non-refundable. If a refund is approved by Bayside Performance, the reimbursement of money will be issued to the customer in the same monetary form as the payment was made to Bayside Performance at the time of the purchase.
Inventory:
Bayside Performance specializes in custom order hard to get or made to
order items. Our website shows inventory two ways.
We are experiencing random Covid-19 lockdown related delays that are out of our control. We ask that you be patient during this time.
In Stock:
In stock items would be shipped same or next business day however inventory numbers are not a guarantee. If in stock items are not available to ship right away we would contact you with an estimate.
Available To Order:
Available to order items where not discontinued the last time manually checked.They may have estimated time in which they should leave our store but this is not a guarantee. Available to order items must arrive to us first and be checked prior to shipping to you. We do stock the most commonly sold items and have a decent inventory however many items have to be sourced at the time of sale from many different distributors. We would contact you with a delivery estimate before processing your order if the posted estimate was incorrect or was not posted.
Parts Fitment Guarantee:
Aftermarket parts do not always fit like OEM parts. Some aftermarket parts require modifications or fitment to work correctly. For example carbon fiber and race bodywork components often need trimming and modifications to fit correctly.
Bayside Performance only guarantees fitment of these parts if they are installed by a licensed tech with experience installing aftermarket parts. Bayside Performance reserves the right to investigate each fitment issue and decide whether the part is incorrect or incorrect installation is the problem. The customer is responsible to install parts correctly or hire a company with the skills to complete the work properly. Please call us for more details.
EK 3D 520Z Series Supersport Rivet Master Link Rivet style master link for EK 3D 520Z chain.
Pitbull Retainer TRS Pins Secures most Pit Bull Trailer Restraint Pins to a wall in your shop or transport vehicle. Reduces clutter and helps ensure that your TRS pins are easily secured and located again when you need them.
Pitbull Axle Holder for Front/Rear Stands Our Axle Holder gives you a place to store your axle when it is removed from your motorcycle. The Axle Holder can be mounted to either side of the stand and the angle is adjustable to suit your needs.
Pitbull Retainer OAR/FHR Stand - Transport Kit Included Pit Bull's Retainer for Single-Sided Swingarm Stands as well as our Forward Handle Rear Stands. This kit addresses the need to store your stands out of the way to reduce clutter in your shop or trailer. Self-tapping screws are included and this kit also includes the bungee cord and d-rings for use in trailers and transport vehicles. Stand in picture is for...
LeoVince Factory S Slip-On Exhaust Italian spirit and fighting soul. All combined with a dark look. The LeoVince Factory S exhaust is the essence of LeoVince's research, which adapts the know-how developed in competition with each model to which the Factory S is intended. The Strength Of The Elements The Factory S Black Edition body sports a black ceramic-based paint, resistant to high temperatures. The exhaust features a carbon fiber end-cap, enriched with a...
Trailer Restraint Additional Floor Mounting Kit Kit includes 1 Floor Plate and 1 set of floor mounting hardware (bolts, nuts, washers, spacers) for mounting your trailer restraint in a second location. Now you can easily have a mounting kit in your trailer, another one in the back of your truck or van, and even one on a piece of plywood in your garage if you so desire. Use the "Standard - 2 inch" bolts if you are...
Alpinestars SP-8 V3 Leather Gloves A universal riding glove bristling with racing DNA, the SP-8 V3 Leather Glove is constructed from highly abrasion resistant, full grain goat leather and synthetic leather material, and delivers high levels of protection thanks to its advanced MotoGP-derived SP dual density knuckle. With a pre-shaped finger construction, a hook and loop cuff closure and a new anatomically profiled grip insert on the palm and thumb, this glove affords a secure and highly...
Puig Touring Windscreen Delivers the most optimal aerodynamics and wind protection Protects your from any impact or object you may encounter on the road Manufactured from high impact resistant acrylic, it increases the safety and protection of the driver The screen features a 2mm rounded contour
Pitbull Hybrid One Armed Rear Stand for Honda CB1000R, Hawk and VFR800 Our new Hybrid One Armed features a removable handle which allows you to use the stand with the handle going either forward or toward the rear of the bike. The handle can be installed going either to the front or back on the drive side, but cannot be used on the non-drive side of these motorcycles.When installed on the drive side, it allows wheel removal. It...
Arai Corsair-X Full Face Motorcycle Helmet Nicky Reset Paying homage to the late American legend Nicky Hayden, Arai presents the Corsair-X Nicky Reset Helmet. Featuring the "Reset and Push Harder" graphic Nicky wore during his time with the Aspar Team in MotoGP, you too can now sport the classic number 69 with this beautifully detailed version of Arai's flagship helmet. VAS Shield Mechanism The SAI shield on the Corsair-V has only a single axis pivot point but the Corsair-X...
Pit Bull Trailer Restraint Bolt Kit 2" Replacement bolts, spacers, and washers necessary for mounting a Pit Bull trailer restraint floor plate.
Pitbull Wheel Chock Extra heavy, low profile. For permanent mounting or quick removal. Includes mounting hardware for one location.
Pit Replacement Trailer Restraint Latches Sold as a pair
Additional Mounting Hardware for Pit Bull Wheel Chock For extra chock locations, quick removal.
Pit Bull Trailer Restraint System The Pit Bull Trailer Restraint System is a revolutionary way to transport your motorcycle using a combination of features never seen before. It holds the bike from its rear axle and allows both tires to rest on the floor of the trailer or transport vehicle. It offers the following three advantages: There are no straps holding the bike down. This minimizes the space...
Trailer Restraint Additional Floor Mounting Kit Kit includes 1 Floor Plate and 1 set of floor mounting hardware (bolts, nuts, washers, spacers) for mounting your trailer restraint in a second location. Now you can easily have a mounting kit in your trailer, another one in the back of your truck or van, and even one on a piece of plywood in your garage if you so desire. Use the "Standard - 2 inch" bolts if you are...