X

Bayside Performance Canadian Flag

Canadian Orders

The prices on Baysideperformance.ca are in Canadian Dollars. All orders shipping to a Canadian address must be placed here.

Bayside Performance USA Flag

United States & International Orders

To visit our USA and International site, click here. You'll be redirected to Baysideperformance.com, where the prices are in US Dollars.

Clip-On Handlebars

Motorcycle Racing Clipon Handlebars

Clip-On Handlebars

There are 117 products.

Sort by:

Showing 1-20 of 117 item(s)

LighTech Racing Clip-ons 10...

LighTech Racing Clip-ons 10 Degree

LighTech Racing Clip-Ons Light-weight replacement clip-on handlebars for sportbikes. LighTech's racing clip-ons can be used by both street riders and racers alike. Simply measure your front fork diameter and select the corresponding clip-on size. CNC machined Laser etched Hard anodized finish Stainless steel hardware Bars sold separately...

CAD $334.95 $294.76

LSL Sport-Match Clip-Ons

LSL Sport-Match Clip-Ons

LSL Sport-Match Clip-Ons For racing use, LSL developed an extremely light clip-on handlebar. LSL can build these clip-ons so light because of the special construction and by using high quality material. The clamp holds the handle with 2 bolts which completley secure the tube. Even if the bolts are not properly tightened the tube cannot fall out. The Sport-match clip-ons are especially useful for racing because the clamp and...

CAD $316.95 $259.90

Vortex Racing 7 Degree...

Vortex Racing 7 Degree Clip-On Handlebars

Vortex Racing 7 Degree Clip-On Handlebars Economical replacement handlebars with amazing strength Machined from solid billet Removable handlebar In the event of a crash, simply replace the handlebar tube instead of the entire clip-on Handlebars sit at a 7 degree angle giving racers and street riders the ultimate handlebar position Stainless steel fasteners and Delrin plastic ends add the finishing touches

CAD $247.95 $203.32

05-08 BMW K1200GT HeliBars...

05-08 BMW K1200GT HeliBars Tour Performance Handlebar Risers

HeliBars Tour Performance Handlebar Risers The new HeliBars Tour Performance adapter positions the handlebars closer to the rider 1" (25mm) Taller 1 3/8" (30mm) Rearward All original cables and hydraulic lines are retained Handcrafted In The USA HeliBars are designed for easy installation, in most cases retaining all original cables and hydraulic lines, and requiring little or no modification to your original equipment. They are made with pride by American craftsmen and women....

CAD $298.50 $262.68

14-18 BMW R NineT Racer...

14-18 BMW R NineT Racer HeliBars Triple Clamp and Risers

HeliBars Triple Clamp and Risers HeliBars is excited to introduce the new tour performance replacement top triple clamp with built in risers for the wildly popular BMW R Nine T Racer. Dramatically improves the handlebar position by a net gain to rider of 5 1/2" 3 1/2" taller 4 1/4" rearward Machined from 6061 T6 aluminum Retains stock handlebar tubes and hardware Retains stock instruments and mount Maintains stock clutch and front brake hydraulic lines, simplifying installation...

CAD $793.50 $698.28

09-18 BMW S1000RR/HP4...

09-18 BMW S1000RR/HP4 HeliBars TracStar Bars

HeliBars TracStar Bars HeliBars Tour Performance handlebar relocation adapters installs between the factory handlebar mounting clamp risers and the top triple clamp to reduce the reach to the grips. All original cables and hydraulic lines are retained and bar end weights are accepted 1.7" (42.5mm) taller 0.8" (20mm) rearward Width: 2009-2014 S1000RR retains original width of 25 1/4" (640mm) 2015-2018 S1000RR 1" (25mm) wider than OEM Handcrafted In The USA...

CAD $478.50 $421.08

06-16 Kawasaki ZX-14R...

06-16 Kawasaki ZX-14R HeliBars Tour Performance Handlebar Risers

HeliBars Tour Performance Handlebar Risers 3/4" (20mm) taller 3/8" (10mm) rear offset CNC machined from solid billet aluminium Durable UV resistant black powdercoat finish All original cables and hydraulic lines are retained Hardware is supplied Handcrafted In The USA HeliBars are designed for easy installation, in most cases retaining all original cables and hydraulic lines, and requiring little or no modification to your original equipment. They are made with...

CAD $118.50 $110.21

08-14 Yamaha R6 HeliBars...

08-14 Yamaha R6 HeliBars TracStar Bars

HeliBars TracStar Bars 2" (50mm) Taller 1" (25mm) Rearward 1" (25mm) Wider Wrist angle optimised for a significant improvement in comfort Reduced vibrations obtained using the supplied rubber bushing and replacement nut for the steering damper All original cables and hydraulic lines are retained and bar end weights are accepted Handcrafted In The USA HeliBars are designed for easy installation, in most cases retaining all original cables and hydraulic lines,...

CAD $448.50 $394.68

Graves Motorsports Clip-ons...

Graves Motorsports Clip-ons Motorcycle Handlebars 41mm

Graves Motorsports 41mm Clip-on Motorcycle Handlebars Graves Motorsports 41mm Clip-on Motorcycle Handlebars. These Clip-ons CNC'ed machined 7075-T6 billet aluminum clamps for superior strength and rigidity. These clip-ons are the choice of many AMA factory race teams and privateers alike. The clip-on tubes are angled 7 degrees down to enhance rider control without sacrificing comfort. All 41mm clip-ons come with black handlebar...

CAD $224.99 $209.24

06-14 Suzuki GSX-R600/750...

06-14 Suzuki GSX-R600/750 HeliBars TracStar Bars

HeliBars TracStar Bars 2" (50mm) taller 1" (25mm) rearward 1 1/4" wider at 26 1/4" total width Wrist angle optimised for a significant improvement in comfort One piece seamless design As always, pre drilled for control housings. A true direct replacement design. Retains factory damper weights All original cables and hydraulic lines are retained and bar end weights are accepted Handcrafted In The USA HeliBars are designed for easy installation, in most cases...

CAD $448.50 $394.68

Driven Racing Halo 1.5"...

Driven Racing Halo 1.5" Riser Clip-Ons

Driven Racing Halo Riser Clip-On Handlebars The all new Halo Riser series clip-on system. These new clip-ons come with a 1.5” riser and are designed to fit perfectly on bikes. All new 3 piece design that aids in quick installation Small cuff design only 34mm tall Able to be use as a 0 degree and 7 degree bar angle using same components. Black anodized...

CAD $331.48 $265.18

LighTech Racing Clip-ons 5...

LighTech Racing Clip-ons 5 Degree

LighTech Racing Clip-Ons Light-weight replacement clip-on handlebars for sportbikes. LighTech's racing clip-ons can be used by both street riders and racers alike. Simply measure your front fork diameter and select the corresponding clip-on size. CNC machined Laser etched Hard anodized finish Stainless steel hardware Bars sold separately...

CAD $334.95 $294.76

LSL Offset-High Clip-Ons

LSL Offset-High Clip-Ons

LSL Offset-High Clip-Ons Seating position and riding comfort are not normally the points which sport bikes are known for. Especially on Super sports, the position of the handlebars is quite controversial for use on the street. Help comes from our "Match" clip-on handlebars. Like no other clip-on, the patented construction improves the handlebar position radically. The clip-ons are machined from billet and bring the handlebars over the...

CAD $399.95 $327.96

Vortex Racing Replacement...

Vortex Racing Replacement Clip-On Bar Black

Vortex Replacement Clip-On Bar Economical replacement clip-on bars with amazing strength Machined from solid billet aluminum Each tube is anodized and includes plastic ends Available in two lengths, standard 10 7/8" and long 11 3/8" Outer Diameter 7/8" Inner Diameter 5/8" Sold each

CAD $24.95 $20.46

Woodcraft 3 Piece Split...

Woodcraft 3 Piece Split Clip-On Assembly

Woodcraft Racing 3 Piece Split Clip-On Assembly Features: Lightweight 6061-T6 grade aluminum bars Improved strength andadjustability Easy installation Pair of bars included in kit Standard bar length 12" Extra long bar length 13.5" Made in USA...

CAD $232.49 $213.83

$204.59 - $224.39

Ducati 1199 Panigale...

Ducati 1199 Panigale Woodcraft Clip-Ons w/Damper Bracket

Ducati 1199 Panigale Woodcraft Racing Clip-Ons w/Damper Bracket Features: Kit includes extra long bars and a custom bracket for mounting the OEM (or any OEM replacement) steering damper Lightweight 6061-T6 grade aluminum bars Improved strength and adjustability Easy installation Pair of bars included...

CAD $293.99 $258.71

08-10 Honda CBR 1000RR...

08-10 Honda CBR 1000RR Woodcraft Clip-On Assembly

2008-2010 Honda CBR 1000RR Woodcraft Clip-On Assembly Features: 2-piece split clip-ons 1 inch rise over a conventional 50mm clip-on Lightweight 6061-T6 grade aluminum bars Easy installation Pair of bars included in kit Standard bar length 12" Extra long bar length 13.5"

CAD $284.99 $253.43

$250.79 - $253.43

06-16 Ninja 650 Woodcraft...

06-16 Ninja 650 Woodcraft Clip-On Risers w/Adapter Plate

2006-2016 Kawasaki Ninja 650 Woodcraft Clip-On Risers with Adapter Plate Kawasaki Ninja 650R adapter plate bolts directly to the stock handlebar mount keeping all of the stock clearances, while putting your hands in a more natural position. This setup allows the use of multiple risers giving you the ability to custom tailor the bar height for optimum comfort. Each plate is machined from tough billet aluminum giving your bike a...

CAD $359.99 $316.79

01-04 Suzuki GSXR 1000...

01-04 Suzuki GSXR 1000 Woodcraft 50/49mm Clip-On Assembly

2001-2004 Suzuki GSXR 1000 Woodcraft 50/49mm Clip-On Assembly The forks on GSXR bikes taper just below the triple clamp to a smaller diameter, leaving traditional 50mm clipons with a clamping area that is not wide enough to grab the entire clipon. Unlike standard 50mm clipons, our stepped GSXR clipons allow you keep stock ride height or to lower your front end on the 06+ GSXR600/750 and still be able to properly clamp the fork....

CAD $239.99 $213.83

$211.19 - $213.83

17-19 Yamaha FZ10/MT10...

17-19 Yamaha FZ10/MT10 Woodcraft Clip-On Risers w/Adapter Plate

2017-2019 Yamaha FZ-10/MT-10 Woodcraft Clip-On Risers with Adapter Plate New adapter plates bolt directly to the stock handlebar mount keeping all of the stock clearances, while putting your hands in a more natural position. Many models have the option to flip your adapter plate upside down, which results in a more aggressive riding position that improves both traction and feel. Most models also allow the use of multiple risers...

CAD $359.99 $329.99

$316.79 - $329.99

Showing 1-20 of 117 item(s)

1
2
3
…
6
Next