There are 93 products.
Pitbull BMW Hybrid One Armed Rear Stand Our new Hybrid One Armed features a removable handle which allows you to use the stand with the handle going either forward or toward the rear of the bike. The handle can be installed going either to the front or back on the drive side, but on BMW bikes, you cannot use this stand on the non-drive side of the motorcycle.When installed on the drive side, it allows wheel removal. It...
Pitbull Ducati Hybrid Dual Lift Motorcycle Front Stand with Removable Handle This stand is capable of lifting from underneath the forks or from the lower triple clamp of most Ducati Superbikes. On bikes with radial mount brakes, the swivel pegs are often placed under the caliper brackets instead of under the forks. If you're not sure, call us or use the LiveHelp on the site.Fits: 916, 996, 998, 999, 1098, and 1198 models. Note:...
Pit Bull Jack Stands for Front or Rear - Pair Our Pit Bull Jack Stands will allow your sport motorcycle to rest on the frame sliders and/or the rear footpegs. Height is adjustable to 14 different settings.U.S. Patent No. D554, 025
Pit Bull Spooled Rear Stand with Removable Handle The Spooled Rear Stand lifts spool-equipped bikes. It is width adjustable to fit virtually all spool-equipped sport bikes. Same as Standard, SS and 999 Rear Stands except for interchangeable top supports. Sold complete with top supports. Specify Narrow for Vintage and 125GP machines. Spools sold separately.Note: Stand does not work on 2008 and up Hayabusa or ZX14R unless the stock...
Pitbull Triumph Hybrid One Armed Rear Stand Includes Both Pins Our new Hybrid One Armed features a removable handle which allows you to use the stand with the handle going either forward or toward the rear of the bike. The handle can be installed going either to the front or back on the drive side, but only to the rear on the non-drive side of most motorcycles.When installed on the drive side, it allows wheel removal; when installed...
Pit Bull Pit Crew Tire Wedge Pit Bull’s new Pit Crew Tire Wedge is a height-adjustable device that allows one person to easily align and steady motorcycle wheels so axles are easy to remove and install.The Tire Wedge can be used with most Pit Bull front and rear stands made in the last 20 years. It quickly attaches without hardware using a solid press fit. Once in place below a tire, height can be set between 0.75 to 4.9...
Pitbull Hybrid Anchor System Pit Bull's Hybrid Anchor is a new take on a tie-down anchor combining the convenience of being quick release with the strength of a permanently mounted anchor. The Hybrid Anchor can be rotated 180 degrees and has a 6,000 lb load capacity in the primary direction with a minimum load capacity of 2,000 lbs in ANY direction. When not in use, you can remove the anchor in seconds and have nothing...
Pitbull BMW F800S/ST Hybrid One Armed Rear Stand Our new Hybrid One Armed features a removable handle which allows you to use the stand with the handle going either forward or toward the rear of the bike. The handle can be installed going either to the front or back on the drive side and cannot be used on the non-drive side of the F800S/ST models.When installed on the drive side, it allows wheel removal. It offers great leverage and...
Pitbull Ducati Hybrid Headlift Front Stand with Removable Handle This stand is capable of lifting from the lower triple clamp of most Ducati Superbikes. Due to the absence of a hole in the lower triple clamp of 916-1198 Superbikes (and 748S/R models), it is necessary to lift those bikes using this "claw" that cradles the lower triple clamp.Fits: 748S, 748R, 916, 996, 998, 999, 1098, and 1198 models. Note: Does not fit...
Pitbull Hybrid Dual Lift Motorcycle Front Stand with Removable Handle Hybrid Dual Lift Stand is based upon a modular design and can be easily converted to lift from the forks OR the lower triple tree by simply swapping out a few parts (included) in a matter of seconds. The Hybrid Dual Lift Front features 7 indexable height adjustments, which is very desirable when removing the forks on your motorcycle or even when...
Pitbull Hybrid Swivels - Pair Converts a Hybrid Headlift stand to be able to lift from the bottom of the forks.Note: This will not convert Newfront (F0031-000) model to be able to lift from the forks. It will only work with the 2012 Hybrid Front Stand.
Pit Bull Top Supports - SS Rear Stand These top supports flip over to fit bikes that do and do not use spools. They come in handy at the track if a spool mount is broken off in a crash. Sold as a pair
Pit Bull Standard Rear Stand with Removable Handle The Standard Rear Stand lifts non-spool equipped bikes by supporting the swingarm with rubber pads. It is width adjustable to fit virtually all sport bikes. Same as Spooled, SS, GP, and 999 Rear Stands except for interchangeable top supports. Sold complete with top supports. Specify Narrow for Vintage and 125GP machines.Note: If bike accommodates spools, it is highly recommended that...
Pit Bull Tire Tree - Fits Most Wheels Our folding Tire Tree holds up to four wheels and has room to mount an electrical box for tire warmer use. Features heavy-duty wheels, collapsible design, and can be positioned upright or horizontally. When folded up, the Tire Tree is only 55" x 26" x 6", which is very convenient for storage and transport.
Pitbull Triumph Thunderbird Rear Stand The Thunderbird Rear Stand was designed to fit the Triumph Thunderbird 1600 models. We do not believe it will fit any 1700 models at this time, although it should fit earlier Thunderbird 900 models.Very similar in design to the Bonneville Rear Stand, this version is wider and features a shorter top support peg on the left side of the bike to clear the ABS module on those models....
Pitbull Hybrid Headlift Motorcycle Front Stand with Removable Handle Hybrid Headlift Stand is based upon a modular design and can be easily converted to lift from the forks instead of the lower triple tree with the addition of hybrid swivels (related products below). The Hybrid Headlift Front features 7 indexable height adjustments, which is very desirable when removing the forks on your motorcycle. To find the right...
Pitbull Hybrid One Armed Rear Stand Pitbull's new Hybrid One Armed features a removable handle which allows you to use the stand with the handle going either forward or toward the rear of the bike. The handle can be installed going either to the front or back on the drive side, but only to the rear on the non-drive side of most motorcycles. When installed on the drive side, it allows wheel removal. It offers great leverage and stability and the ball bearing head makes it easy to...
Pitbull Floor Mounting Harware Only - Hybrid Anchor Hardware Kit which allows you to mount Pit Bull's Hybrid Anchor System in an alternate location. Bolts, washers, mushroom spacers and lock nuts included.
Pit Bull Top Supports GP Style Rear Stand These top supports are tailored to fit motorcycles with a GP style inverted "V" instead of traditional spool mounts. The top support has a "spool" mounted to it to lift from the inverted "V". Sold as a pair
Pitbull Wheel Chock Extra heavy, low profile. For permanent mounting or quick removal. Includes mounting hardware for one location.
Pitbull Triumph Thunderbird Wide Forklift Front Stand The Wide Forklift Front was designed to address the needs of the Triumph Thunderbird. The Thunderbird has wider forks than our Hybrid Forklift Front stand was designed for, so this model is wider and comes standard with our extended length removable handle for added leverage.While similar in appearance to our Hybrid Forklift Front Stand, it's important to note that this stand...
Pitbull Elite One Armed Rear Stand Pitbull's new Elite One Armed Rear Stand was designed to meet the needs of the Kawasaki H2/H2R (up to 2018). The design features a lower cross tube for increased tire clearance as well as an overall lower height for more leverage. This stand could be used on other motorcycles with single sided swingarms but the primary benefit would be increased leverage. Sold complete with pins to fit the Kawasaki H2/H2R, but pins are interchangeable to fit...
Pit Bull SS Rear Stand (Standard/Spooled) with Removable Handle The SS Rear Stand can be used as a Standard or Spooled Rear Stand by flipping the top supports over. It is width adjustable to fit virtually all sport bikes. Same as Spooled, Standard, GP, and 999 Rear Stands except for interchangeable top supports. Sold complete with top supports. Specify Narrow for Vintage and 125GP machines. Spools sold separately.Note: Stand...
Pitbull Ducati Hybrid One Armed Rear Stand with Large Hub - Includes Left and Right Pins Our new Hybrid One Armed features a removable handle which allows you to use the stand with the handle going either forward or toward the rear of the bike. The handle can be installed going either to the front or back on the drive side, but only to the rear on the non-drive side of most motorcycles.When installed on the drive side, it...
