There are 20 products.
Pit Bull Spooled Rear Stand with Removable Handle The Spooled Rear Stand lifts spool-equipped bikes. It is width adjustable to fit virtually all spool-equipped sport bikes. Same as Standard, SS and 999 Rear Stands except for interchangeable top supports. Sold complete with top supports. Specify Narrow for Vintage and 125GP machines. Spools sold separately.Note: Stand does not work on 2008 and up Hayabusa or ZX14R unless the stock...
Pit Bull Standard Rear Stand with Removable Handle The Standard Rear Stand lifts non-spool equipped bikes by supporting the swingarm with rubber pads. It is width adjustable to fit virtually all sport bikes. Same as Spooled, SS, GP, and 999 Rear Stands except for interchangeable top supports. Sold complete with top supports. Specify Narrow for Vintage and 125GP machines.Note: If bike accommodates spools, it is highly recommended that...
Pit Bull SS Rear Stand (Standard/Spooled) with Removable Handle The SS Rear Stand can be used as a Standard or Spooled Rear Stand by flipping the top supports over. It is width adjustable to fit virtually all sport bikes. Same as Spooled, Standard, GP, and 999 Rear Stands except for interchangeable top supports. Sold complete with top supports. Specify Narrow for Vintage and 125GP machines. Spools sold separately.Note: Stand...
Pit Bull GP Style Rear Stand with Removable Handle The GP Style Rear Stand is designed for use with bikes that feature a GP style inverted V on the swingarm (like Pit Bull GP Receivers). Works with products such as the Gilles Chain Adjuster as well.
Pit Bull Standard Rear Stand 240/300 Wide with Removable Handle This stand is designed to work underneath certain aftermarket wide tire swingarms designed for 240 and 300 width tires. May not work with some models depending on swingarm design.
Pit Bull Standard Removable Forward Handle Rear Stand The Standard Forward Handle Rear lifts non-spool equipped bikes by supporting the swingarm with rubber pads. It is width adjustable to fit virtually all sport bikes. It is also height adjustable to set clearance under rear wheel. Same as Spooled Forward Handle Rear except for interchangeable top supports. Sold Complete with top supports.Note: Not recommended for Vintage or 125GP...
Pit Bull Spooled Removable Forward Handle Rear Stand The Spooled Forward Handle Rear lifts spool-equipped bikes. It is width adjustable to fit virtually all sport bikes. It is also height adjustable to set clearance under rear wheel. Same as Standard Forward Handle Rear except for interchangeable top supports. Sold complete with top supports. Advantages to the forward handle stands: a)user can hold bike's handgrip when getting...
Pit Bull Display Rear Motorcycle Stand (Pins Sold Separately) Pit Bull Display Stands are a popular choice among collectors, motorcycle dealers, and even manufacturers. Our display stands use the same axle pins as our Trailer Restraint Systems so you can support your bike upright in a showroom, man-cave, or trade show environment.
Pit Bull 2008-2014 Kawasaki Concours Rear Wheel Motorcycle Stand This stand was designed with help from a Pit Bull customer and Concours 14 owner. It cradles the swingarm and prevents slippage. Height is adjustable so you can set it at the ideal height for your needs.
Pit Bull Rear Stand Hayabusa/ZRX/ZX14/Ninja 1000 Busa Rear Stand, height adjustable 11.75" - 14.75"This stand was designed for use with late model bikes that have low hanging stock rear fenders and have not had a fender eliminator kit installed(like the 2nd gen Hayabusa, ZX14, ZX14R, Ninja 1000). This stand is also ideal for Kawasaki ZRX motorcycles to give better leverage when lifting than you would get with a traditional...
Pit Bull Rear Stand for 2008 Buell 1125R with Removable Handle This stand was designed specifically for the 2008 Buell 1125. The swivel supports are designed to ensure the stand does not slide on the swingarm nor do the pegs block access to the pinch bolt.
Pitbull Honda VFR1200 Rear Stand The VFR1200 Rear Stand was developed by Pit Bull with the assistance of American Honda to lift from the center stand mount location on VFR1200's that do not have a center stand. The stand comes complete with the appropriate pin.
Pitbull MV Agusta Hybrid One Armed Rear Stand Our new Hybrid One Armed features a removable handle which allows you to use the stand with the handle going either forward or toward the rear of the bike. The handle can be installed going either to the front or back on the drive side, but only to the rear on the non-drive side of most motorcycles.When installed on the drive side, it allows wheel removal; when installed on the non-drive...
Pitbull KTM 1290 Hybrid One Armed Rear Stand Includes Both Pins Our new Hybrid One Armed features a removable handle which allows you to use the stand with the handle going either forward or toward the rear of the bike. The handle can be installed going either to the front or back on the drive side, but only to the rear on the non-drive side of most motorcycles.When installed on the drive side, it allows wheel removal; when installed...
Pitbull Hybrid One Armed Rear Stand for Honda CB1000R, Hawk and VFR800 Our new Hybrid One Armed features a removable handle which allows you to use the stand with the handle going either forward or toward the rear of the bike. The handle can be installed going either to the front or back on the drive side, but cannot be used on the non-drive side of these motorcycles.When installed on the drive side, it allows wheel removal. It...
Pitbull KTM 1290 Hybrid One Armed Rear Stand Our new Hybrid One Armed features a removable handle which allows you to use the stand with the handle going either forward or toward the rear of the bike. The handle can be installed going either to the front or back on the drive side, but cannot be used on the non-drive side of these motorcycles.When installed on the drive side, it allows wheel removal. It offers great leverage and...
Pit Bull Rear Stand for 2009-Up Buell 1125 and 2009-Up Yamaha V-max with Removable Handle This stand features extra-wide width to accommodate the wide swingarms found on the Buell 1125 and V-max motorcycles.Spools are sold separately. V-max requires 8mm spools and Buell requires 6mm spools(we do not recommend use of the factory installed Buell spools). This stand can also be used on some 240/300 swingarms, usually with the addition of...
Pitbull Fully Adjustable GP Style Rear Stand Designed to have considerable adjustment levels to cover almost any motorcycle using GP-style receivers mounted to the swingarms. The L-shaped bracket can be flipped up or down and depending on which way it is installed, you have a different range of adjustment: Up position: height range 14"-16", width range 8.75"-14-5/8" Down position: height range 13"-15", width range 9-3/8"-13-3/8" This stand has height and width adjustability and is...
Pitbull Fully Adjustable Standard Rear Stand Designed for use with non-spooled swingarms and offers a lot of versatility due to it's width and height adjustability. First introduced in 2008 as the Busa rear, the fully adjustable rear accommodates bikes with large, low hanging rear fenders as well as allowing you to fine tune the height of your stand for your leverage and/or maintenance needs. If you have installed a fender eliminator kit, you can simply use the traditional...
Pitbull Dirt Bike Rear Stand The dirt bike rear allows for lifting a variety of dirt bikes with few exceptions. Two rubber covered pegs on either side of the bike locate under the swingarms for support while a third peg . It's design allows peg on either side locates behind the swingarms to prevent slippage. This stand comes with a removable handle. This stand is based off of hybrid front lower chassis so you can convert it to a front stand by adding the hybrid swivels (sold...