There are 37 products.
Aim Sports Optical CAN Lap Receiver This receiver allows to sample lap time in the traditional way but using the CAN bus protocol. This is useful, for example, when the GPS receiver cannot be used. The optical CAN receiver connects to cables labelled "CAN Exp" or to "Exp" connector of any AiM device.
Aim Sports Fuel/Oil 0-10 Bar Pressure Sensor 1/8 NPT This sensor fits the measurement of oil and fuel pressure up to 10 Bars of pressure. The sensor is sold with a 40 cm cable.
Aim Sports Linear Potentiometer Sensor AiM loggers can measure the displacement between two points using a sensor (linear potentiometer) directly connected to the points of measure. This potentiometer can measure linear displacements like: Dampers compression or extension Steering rotation measured through the rack displacement Do not use this sensor to measure distances beyond the potentiometer maximum travel. The car/bike linear potentiometer can be connected to any analog...
Aim Sports Fuel/Oil 0-100 Bar Pressure Sensor M10 Thread This sensor fits the measurement of oil and fuel pressure up to 100 Bars of pressure. The sensor is sold with a 40 cm cable.
Aim Sports Throttle Potentiometer Speed Sensor AiM instruments can measure the relative displacement between two different points using a sensor (rotary potentiometer) directly connected to the two measure points. This sensor may be used to measure angular displacements, such as throttle position. This instrument’s mechanical measure range goes up to 130°, while the electrical measure range goes up to 106°.
Aim Sports Fuel/Oil 0-100 Bar Pressure Sensor 3/8-24 Thread This sensor fits the measurement of oil and fuel pressure up to 100 Bars of pressure. The sensor is sold with a 40 cm cable.
Aim Sports Fuel/Oil 0-160 Bar Pressure Sensor M10 Thread This sensor fits the measurement of oil and fuel pressure up to 160 Bars of pressure. The sensor is sold with a 40 cm cable.
Aim Sports Fuel/Oil 0-160 Bar Pressure Sensor 3/8-24 Thread This sensor fits the measurement of oil and fuel pressure up to 160 Bars of pressure. The sensor is sold with a 40 cm cable.
Aim Sports Fuel/Oil 0-50 PSI Pressure Sensor 1/8 NPT This sensor fits the measurement of oil and fuel pressure up to 50 PSI of pressure. The sensor is sold with a 40 cm cable.
Aim Sports Fuel/Oil 0-150 PSI Pressure Sensor 1/8 NPT This sensor fits the measurement of oil and fuel pressure up to 150 PSI of pressure. The sensor is sold with a 40 cm cable.
Aim Sports Fuel/Oil 0-300 PSI Pressure Sensor 1/8 NPT This sensor fits the measurement of oil and fuel pressure up to 300 PSI of pressure. The sensor is sold with a 40 cm cable.
Aim Sports Fuel/Oil 0-2000 PSI Pressure Sensor 1/8 NPT This sensor fits the measurement of oil and fuel pressure up to 2000 PSI of pressure. The sensor is sold with a 40 cm cable.
Aim Sports VDO 0-10 Bar Pressure Sensor M10 Thread This sensor measures pressure of liquids like oil and gasoline. Do not use it to measure brake pressure. It needs a careful installation. The VDO sensor is made of a cylinder that has to be screwed to the engine and two connectors that sample GND and pressure signals. If the engine thread is bigger than the cylinder thread AiM suggests to use joints. AiM recommends to tightly screw the sensor to the engine so that vibrations do...
