There are 72 products.
HeliBars Clutch Line Extension HeliBars all-new adapter for the extension of BMW clutch hoses. Extension of clutch hoses of about 3cm (1") Mounting generally without bleeding CNC milled and black anodized 15° angle for perfect clutch hose laying Includes: adapter, 2x sealing rings, banjo bolt Fitment: K50 (R 1200 GS) (10/2011 - 2022) LC K50 (R 1250 GS) (2018 - 2022) K51 (R 1200 GS Adventure) (09/2012 - 07/2018) LC K51 (R 1250 GS Adventure) (2018 - 2022) K52 (R 1200...
HeliBars TracStar Bars HeliBars Tour Performance handlebar relocation adapters installs between the factory handlebar mounting clamp risers and the top triple clamp to reduce the reach to the grips. All original cables and hydraulic lines are retained. Includes a high quality aluminum bar end slider on the bars. Exceptional build quality backed by a 30 day money back satisfaction guarantee 1" (25mm) taller** 3/4" (19mm) rearward** Width: 1/2" Wider than stock (13mm)...
HeliBars TracStar Bars 2" (50mm) Taller 1" (25mm) Rearward 1" (25mm) Wider Wrist angle optimised for a significant improvement in comfort Reduced vibrations obtained using the supplied rubber bushing and replacement nut for the steering damper All original cables and hydraulic lines are retained and bar end weights are accepted Handcrafted In The USA HeliBars are designed for easy installation, in most cases retaining all original cables and hydraulic lines,...
HeliBars Triple Clamp and Risers HeliBars is excited to introduce the new tour performance replacement top triple clamp with built in risers for the wildly popular BMW R Nine T Racer. Dramatically improves the handlebar position by a net gain to rider of 5 1/2" 3 1/2" taller 4 1/4" rearward Machined from 6061 T6 aluminum Retains stock handlebar tubes and hardware Retains stock instruments and mount Maintains stock clutch and front brake hydraulic lines, simplifying installation...
HeliBars TracStar Bars HeliBars Tour Performance handlebar relocation adapters installs between the factory handlebar mounting clamp risers and the top triple clamp to reduce the reach to the grips. All original cables and hydraulic lines are retained and bar end weights are accepted 1.7" (42.5mm) taller 0.8" (20mm) rearward Width: 2009-2014 S1000RR retains original width of 25 1/4" (640mm) 2015-2018 S1000RR 1" (25mm) wider than OEM Handcrafted In The USA...
HeliBars Tour Performance Handlebar Risers 3/4" (19mm) taller 5/16" (8mm) rearward All original cables and hydraulic lines are retained Complimentary bronze powder coat Handcrafted In The USA HeliBars are designed for easy installation, in most cases retaining all original cables and hydraulic lines, and requiring little or no modification to your original equipment. They are made with pride by American craftsmen and women. Greater Long Distance Comfort HeliBars provides...
HeliBars TracStar Bars This TracStar offering is a one piece alloy marvel and natural evolution of our already successful handlebars. CNC machined using Heli Modified’s proprietary method rendering handlebars that provide better handling, more comfort and offer vastly improved feedback and leverage. Designed for the rider that wants more comfort with a trick look and feel. 1 1/4” (32mm) taller 3/4” (19mm) rearward 1 1/2” (35mm) wider Durable UV resistant silver powdercoat 6061...
HeliBars Tour Performance Handlebar Risers 3/4" (20mm) taller 3/8" (10mm) rear offset CNC machined from solid billet aluminium Durable UV resistant black powdercoat finish All original cables and hydraulic lines are retained Hardware is supplied Handcrafted In The USA HeliBars are designed for easy installation, in most cases retaining all original cables and hydraulic lines, and requiring little or no modification to your original equipment. They are made with...
HeliBars TracStar Bars 1 1/4" (32mm) Taller 1 1/8" (29mm) Rearward All original cables and hydraulic lines are retained Fits the following models Tiger 800 / 800XR / 800XC / 800XCX / 800XCA Handcrafted In The USA HeliBars are designed for easy installation, in most cases retaining all original cables and hydraulic lines, and requiring little or no modification to your original equipment. They are made with pride by American craftsmen and women. Greater Long Distance Comfort...
HeliBars Tour Performance Handlebar Risers The new HeliBars Tour Performance adapter positions the handlebars closer to the rider: 1" (25mm) Taller 1" (25mm) Rearward All original cables and hydraulic lines are retained 1 hour installation Powdercoat compliments stock handlebar color Handcrafted In The USA HeliBars are designed for easy installation, in most cases retaining all original cables and hydraulic lines, and requiring little or no modification to your original...
HeliBars TracStar Bars 1 1/4” (32mm) taller 1/2” (13mm) rearward 1 1/2” (38mm) wider Durable UV resistant silver powdercoat 6061 Aluminum construction Works with factory heated grips Comfortable down angle and back angles have been retained All original cables and hydraulic lines are retained and bar end weights are accepted Accommodates Throttlemeister Handcrafted In The USA HeliBars are designed for easy installation, in most cases retaining all original cables and hydraulic lines,...
HeliBars TracStar Bars Black color 31.75 mm taller (1 1/4") 12.7 mm rearward (1/2" closer to rider) Stock Width Greater hand clearance Handcrafted In The USA HeliBars are designed for easy installation, in most cases retaining all original cables and hydraulic lines, and requiring little or no modification to your original equipment. They are made with pride by American craftsmen and women. Greater Long Distance Comfort HeliBars provides motorcyclists with better handling...
HeliBars Tour Performance Handlebar Risers The new HeliBars Tour Performance adapter positions the handlebars closer to the rider 51mm (2") increased handlebar height 19 mm (3/4") rear offset to reduce reach to grips CNC machined from extruded 6061T6 aluminum Finished in a silver or black powder coat Removes bar and hand distractions in the rearview mirrors due to the bars and controls being moved up and out of the field of view All original cables and hydraulic lines...
HeliBars TracStar Bars 2" (50mm) taller 1" (25mm) rearward 1 1/4" wider at 26 1/4" total width Wrist angle optimised for a significant improvement in comfort One piece seamless design As always, pre drilled for control housings. A true direct replacement design. Retains factory damper weights All original cables and hydraulic lines are retained and bar end weights are accepted Handcrafted In The USA HeliBars are designed for easy installation, in most cases...
HeliBars TracStar Bars 1 1/2" (41mm) taller than stock 1" (25mm) more rearward stock 1 5/8" (38mm) wider than stock Wrist angle optimised for a significant improvement in comfort CNC carved from a single 6061 extruded aluminum billet One piece seamless design As always, pre drilled for control housings. A true direct replacement design. Retains factory damper weights All original cables and hydraulic lines are retained and bar end weights are accepted...
HeliBars Tour Performance Handlebar Risers 1" (25mm) Taller 1 1/8" (28mm) Closer to Rider All original cables and hydraulic lines are retained Quick installation Handcrafted In The USA HeliBars are designed for easy installation, in most cases retaining all original cables and hydraulic lines, and requiring little or no modification to your original equipment. They are made with pride by American craftsmen and women. Greater Long Distance Comfort HeliBars provides...
HeliBars TracStar Bars 1 5/8" (41mm) Taller 1" (25mm) Rearward 3/4" (19mm) Wider Kit includes 54mm fork tube clamp required for installation Reduced vibrations obtained using the supplied rubber bushing and replacement nut for the steering damper Wrist angle optimised for a significant improvement in comfort All original cables and hydraulic lines are retained and bar end weights are accepted Handcrafted In The USA HeliBars are designed for easy installation, in...
HeliBars TracStar Bars 1 5/8" (41mm) Taller 1/2" (12mm) Rearward 1/2" (12mm) Wider Overall Wrist angle optimised for a significant improvement in comfort CNC machined from solid 6061 billet aluminum Seamless one piece design is less than half the weight of the original design Durable UV resistant silver powdercoat All original cables and hydraulic lines are retained and bar end weights are accepted Handcrafted In The USA HeliBars are designed for easy...
HeliBars Tour Performance Handlebar Risers 1" (25mm) Taller 1.2" (30.6mm) Rear Offset Shot Peen finish increases the structural strength of the adapter & compliments stock handlebar color Clear powder coat for added durability CNC machined from extruded 6061 Aluminum All original cables and hydraulic lines are retained Provides threaded mount for centralized 1" Ram-mount Ball (not included) Quick installation Handcrafted In The USA HeliBars are designed for easy...
HeliBars TracStar Bars 1 1/4” (32mm) taller 3/4” (19mm) rearward 1 1/4” (38mm) wider Durable UV resistant silver powdercoat 6061 Aluminum construction Works with factory heated grips Comfortable down angle and back angles have been retained Accommodates Throttlemeister All original cables and hydraulic lines are retained and bar end weights are accepted Handcrafted In The USA HeliBars are designed for easy installation, in most cases retaining all original...
HeliBars Tour Performance Handlebar Risers HeliBars is pleased to introduce the Tour Performance Riser, designed to provided more comfort and built tough to survive whatever you can throw at it!! 2" taller 2 1/4" rearward Machined from 6061 T6 Aluminum Retains stock handlebar, hardware and hydraulic lines Handcrafted In The USA HeliBars are designed for easy installation, in most cases retaining all original cables and hydraulic lines, and requiring little or no modification...
HeliBars Tour Performance Handlebar Risers 1 1/4" (3 cm) taller than stock 5/8" (1.5 cm) rearward offset Once piece design reduces handlebar flex in the rubber mounted risers Works with all stock components Coated in a beautiful UV resistant closely matched Powdercoat finish Handcrafted In The USA HeliBars are designed for easy installation, in most cases retaining all original cables and hydraulic lines, and requiring little or no modification to your original equipment....
HeliBars Tour Performance Handlebar Risers HeliBars Tour Performance handlebar relocation adapters with dual positioning installs between the factory handlebar mounting clamp risers and the top triple clamp to reduce the reach to the grips. All original cables and hydraulic lines are retained and are un-modified Hard Coat Anodized Increased leverage boosts confidence, improves low speed handling and makes the new Wing feel even lighter. Super precision adapters have drain...
HeliBars TracStar Bars 2" (50mm) Taller 1" (25mm) Rearward 1 1/4" (32mm) Wider at 26 1/4" total width Reduced vibrations obtained using the supplied rubber bushing and replacement nut for the steering damper Wrist angle optimised for a significant improvement in comfort All original cables and hydraulic lines are retained and bar end weights are accepted Handcrafted In The USA HeliBars are designed for easy installation, in most cases retaining all original...
