There are 90 products.
Pitbull Ducati Hybrid One Armed Rear Stand Ducati Hybrid One Armed features a removable handle which allows you to use the stand with the handle going either forward or toward the rear of the bike. The handle can be installed going either to the front or back on the drive side, but only to the rear on the non-drive side of most motorcycles.When installed on the drive side, it allows wheel removal; when installed on the non-drive...
Pit Bull Standard Removable Forward Handle Rear Stand The Standard Forward Handle Rear lifts non-spool equipped bikes by supporting the swingarm with rubber pads. It is width adjustable to fit virtually all sport bikes. It is also height adjustable to set clearance under rear wheel. Same as Spooled Forward Handle Rear except for interchangeable top supports. Sold Complete with top supports.Note: Not recommended for Vintage or 125GP...
Pit Bull Spooled Removable Forward Handle Rear Stand The Spooled Forward Handle Rear lifts spool-equipped bikes. It is width adjustable to fit virtually all sport bikes. It is also height adjustable to set clearance under rear wheel. Same as Standard Forward Handle Rear except for interchangeable top supports. Sold complete with top supports. Advantages to the forward handle stands: a)user can hold bike's handgrip when getting...
Pitbull Retainer Headlift Stand - Transport Kit Included Pit Bull's Retainer for our Headlift is very similar to our Retainer for the Rear Stands except it features an additional rubber protector where the stand would normally collapse on itself. Self-tapping screws are included and this kit as well as the bungee cord and d-rings. Stand in picture is for reference only. This item is only the Retainer used to hang the...
Ducati Forklift Converter For Use with older Pit Bull Forklift Front (1997 - 2011) Ducati Superbikes present a special problem for lifting from the lower triple clamp since there is no hole through the bottom of the steering stem. The unique "J" hooks are lined with Delrin plastic to gently lift the front of the bike without scratching the lower triple clamp. While the Forklift Converter can...
Pit Bull Top Supports Standard Rear Stand Standard Top Supports lift from under the swingarm. Rubber pads have ridges to help them grip. Sold as a pair
Pit Bull Display Rear Motorcycle Stand (Pins Sold Separately) Pit Bull Display Stands are a popular choice among collectors, motorcycle dealers, and even manufacturers. Our display stands use the same axle pins as our Trailer Restraint Systems so you can support your bike upright in a showroom, man-cave, or trade show environment.
Pitbull Front Stand Pins And Adapters Pins provide the correct fit for Newfront, Forklift, Converter, and Standard Front Stands. The pins are bike-specific. Some bikes also require the use of a pin adapter. Refer to the chart below for the proper fitment.To find the right Pin/Adapter for your bike model please check the Pit Bull Front Stand Fitting Chart
$12.53 - $69.93
Pitbull Retainer Headlift Stand - Shop Kit Pit Bull's Retainer for our Headlift is very similar to our Retainer for the Rear Stands except it features an additional rubber protector where the stand would normally collapse on itself. Self-tapping screws are included and this kit although the bungee cord and d-rings are NOT part of this Shop use kit. Stand in picture is for reference only. This item is only the...
Pitbull Ducati Hybrid Converter The Hybrid Ducati Converter is designed to allow you to convert your Hybrid Forklift or Hybrid Headlift to allow lifting the lower triple clamp of most Ducati Superbikes. If you're not sure if this will fit your Ducati Superbike, call us, email, or use the LiveHelp on the site. Fits: 916, 996, 998, 999, 1098, and 1198 models. Note: Does not fit anything not listed above...
Pitbull Standard Plates Forward Handle Rear Use with our Forward Handle Rear to lift non-spool equipped bikes.
Pit Bull 2008-2014 Kawasaki Concours Rear Wheel Motorcycle Stand This stand was designed with help from a Pit Bull customer and Concours 14 owner. It cradles the swingarm and prevents slippage. Height is adjustable so you can set it at the ideal height for your needs.
Pitbull Front Stand Pins And Adapters Pins provide the correct fit for Newfront, Forklift, Converter, and Standard Front Stands. The pins are bike-specific. Some bikes also require the use of a pin adapter. Refer to the chart below for the proper fitment. Pit Bull Front Stand Fitting Chart
$12.53 - $69.93
Pitbull Spooled Plates Forward Handle Rear Stand Use with our Forward Handle Rear to lift spool-equipped bikes.
Pit Bull Rear Stand Hayabusa/ZRX/ZX14/Ninja 1000 Busa Rear Stand, height adjustable 11.75" - 14.75"This stand was designed for use with late model bikes that have low hanging stock rear fenders and have not had a fender eliminator kit installed(like the 2nd gen Hayabusa, ZX14, ZX14R, Ninja 1000). This stand is also ideal for Kawasaki ZRX motorcycles to give better leverage when lifting than you would get with a traditional...
Pitbull Trailer Restraint Replacement Pin Fitting Includes only the pin fitting hardware for the bike selected. Pit Bull Fitting Chart *Note: Part number F0075X-001 Does not fit K1600 or R1200RT models due to pipe interference. Does not fit R9T model with low exhaust (because it blocks access to hole) *Note: Honda CBR250R require aftermarket exhaust system, does not fit with stock exhaust. *Note:...
$125.93 - $215.53
Pitbull Retainer For Trailer Restraint - Transport Kit Included Pit Bull's Retainer for our Trailer Restraint Systems works with both our restraints as well as allowing you to store your latches. This kit will help reduce clutter in your shop or trailer. Self-tapping screws are included and this kit also includes the bungee cord and d-rings for use in trailers and transport vehicles. Restraint in picture is for...
Pitbull Rear Stand With Removable Handle This stand is designed specifically for use with non-spooled Ducati 999 and 749 motorcycles. The top supports can be purchased separately to modify your existing rear stand.These stands are not ideal for 2005 and later models that had the threaded holes to accept spools. If your swingarm is spooled, use either F0003-000, F0043-000, or F0028-000.
Pitbull Replacement One Armed Rear Stand Pin Includes only the pin for a one armed rear stand for the bike selected. To find the right Pin/Adapter for your bike model please check the Pitbull Rear Stand Fitting Chart Note: May fit other models, but the restraint system has only been tested on the listed models. B Pin: BMW Single sided swing arm pin B8 Pin: BMW F800S/ST with single-sided swingarm specific. D Pin: Fits...
$50.33 - $90.93
Pit Bull Trailer Restraint Bolt Kit Replacement bolts, spacers, and washers Included in trailer restraint system 2" bolt kit for 3/4" floors, most common 3" bolt kit for 1-3/4" floors
$15.33 - $19.53
Pit Replacement Trailer Restraint Latches Sold as a pair
Pitbull Retainer Trailer Restraint - Shop Kit Pit Bull's Retainer for our Trailer Restraint Systems works with both our restraints as well as allowing you to store your latches. This kit will help reduce clutter in your shop or trailer. Self-tapping screws are included and this kit although the bungee cord and d-rings are NOT part of this Shop use kit. Restraint/latches in picture are for reference only. This...
Pitbull Honda CBR929RR Replacement Shims Rear Stand Shim - Honda CBR929RR Use with Standard or SS Rear to make Honda CBR929 sit level
Pit Bull Rear Stand for 2008 Buell 1125R with Removable Handle This stand was designed specifically for the 2008 Buell 1125. The swivel supports are designed to ensure the stand does not slide on the swingarm nor do the pegs block access to the pinch bolt.
