Filter Products

Categories

Show/hide more options

Subcategories

Brands

Show all

Price

$0.00 - $12,915.00

Fleet And Auto Maintenance

Fleet And Auto Maintenance

There are 61 products.

Showing 1-20 of 61 item(s)

JET Tools 5 Piece Internal And External Bearing Puller Kit

JET Tools 5 Piece Internal And External Bearing Puller Kit Remove internal and external bearing cups, seals, bushings etc. Special cone adaptor included which securely locks jaws on part to be removed Use with slide hammer for more torque Comes in a convenient blow mould storage case Kit includes: 2.7lb (1.24kg) Slide Hammer (5/8"-18 thread) Two Internal 3-Jaw Sets (Capacity 10 - 30mm, 30 – 80mm) External 3-Jaw Set (10 - 80mm) Cone Adaptor...

Regular price CAD $569.05 Price $455.24

JET Tools 4-In-1 Ball Joint Service Kit

JET Tools 4-In-1 Ball Joint Service Kit For press-fit vehicle joint components Heavy duty, four function kit to service the removal/installation of ball joints, universal joints, truck brake anchor pins and 4WD ball joints Both ball joint and 4WD ball joint service can be done without taking the control arm off U-joint service can be performed on needle type U-joint bearings Truck anchor pin service can be performed with pins up to 1-1/4" diameter Services 4WD...

Regular price CAD $444.85 Price $355.88

JET Tools Multi Purpose Slide Hammer Puller Kit

JET Tools Multi Purpose Slide Hammer Puller Kit Extract flange-type rear axles, semi-floating rear axles bearings, balancers and other press-on parts With the 2/3 jaw combination, it can remove gears, outer races, grease retainers, oil seals and other internal/ external pulling jobs Used on most cars and light trucks that have axles with bolts & studs no larger than 9/16" in diameter Applies to 4.5 & 6 bolt stud circles that range from 4-1/4" - 5-9/16"...

Regular price CAD $431.05 Price $344.84

JET Tools 12 Piece 10 Ton Hyraulic Gear Puller Set

JET Tools 12 Piece 10 Ton Hyraulic Gear Puller Set Jaws, yokes, bearing separator and ram made of heat treated Chrome Vanadium steel for ultimate strength Hydraulic ram requires no power - develops up to 10 tons of pressure with hand power only All components hardened to HRC 42~45 for professional use Includes twin and triple heads for assembling 2 jaw and 3 jaw pullers Includes 4-1/2" bearing separator Comes in a convenient blow mould storage case

Regular price CAD $982.95 Price $786.36

JET Tools Ball Joint Master Service Set

JET Tools Ball Joint Master Service Set For press fit vehicle components Removes and installs ball joints, universal joints, truck brake anchor pins, and 4WD ball joints C-frame can be used alone to remove/replace universal joints Fits most Dodge® Ram, Ford®, GM®, IHC® and Jeep® 2 and 4 wheel drive pick-up trucks, SUV’s and vans with Dana® front axles Kit includes: 1 c-frame press with screw (1.106” x 7tpi) 7 receiving tubes 4 receiving...

Regular price CAD $741.50 Price $593.20

JET Tools 4 Piece Jumbo Handle Cushion Grip Mechanic's Pry Bar Set

JET Tools 4 Piece Jumbo Handle Cushion Grip Mechanic's Pry Bar Set Chrome Molybdenum steel for maximum strength Super large sizes for the heaviest duty applications Extra large bi-material handles provide exceptional grip and comfort and allow the use of both hands for maximum leverage “Go-thru" shanks with steel end caps Available separately or in 4 piece sets Jumbo length: 24" – 45°, 24" – 90°, 36" – 45°, 36" – 90° Blow mould case

Regular price CAD $512.15 Price $409.72

JET Tools 12 Piece Bearing Seperator Set

JET Tools 12 Piece Bearing Seperator Set Separator bodies made of heat treated Chrome Vanadium steel for maximum strength All components hardened to HRC 42~45 for professional use Separators have knife like edges to get behind bearings where regular gear puller jaws are too thick to grip Can be used with push or pull type gear pullers Includes components to assemble push-type puller Contains: 2-1/4" Bearing Separator (1) 3-1/2" Bearing...

Regular price CAD $344.85 Price $275.88

JET Tools 500 Amp Carbon Pile Tester

JET Tools 500 Amp Carbon Pile Tester 500AMP variable load carbon pile tester Colour-coded, temperature compensation pass/fail bands on the voltmeter insures precise battery load test results Separate voltmeter and ammeter, for easy monitoring Tests batteries up to 1000CCA Fully insulated, heavy duty, colour coded battery clamps & wire leads For 12V batteries, alternators, regulators & starters systems Designed with built in 15 second load warning beeper...

Regular price CAD $327.60 Price $262.08

JET Tools Multi-Port Injection Pressure Tester

JET Tools Multi-Port Injection Pressure Tester Test fuel pump pressure on most domestic and import vehicles equipped with multi-port fuel injection systems using the small or large Schrader type connection Can be used on most import vehicles, except those equipped with Bosch C.I.S. Includes bleed-off valve with hose to safely enable technician to depressurize fuel system after testing 3-1/2" gauge diameter has dual scale: 145 PSI/1000 Kpa Full instructions included...

Regular price CAD $275.85 Price $220.68

JET Tools 7 Piece Axle Nut Socket Set

JET Tools 7 Piece Axle Nut Socket Set Sockets made of high quality, Chrome Molybdenum steel for best performance and life Sockets are 1/2" drive and are extra long in order to adequately access FWD spindle nuts May be used with air and electric impact wrenches, ratchets, flex and breaker bars and with torque wrenches Comes in convenient blow mould storage case Includes: 29, 30, 32, 34, 35, 36, 38 and 39 mm

Regular price CAD $253.45 Price $202.76

JET Tools Air Line Inflator With Tire Gauge Dial Type

JET Tools Air Line Inflator With Tire Gauge Dial Type 3-in-1 tool, air line inflator & deflator with tire pressure gauge Heavy duty construction provides long service life 360° swivel easy-to-read gauge with heavy duty rubber gauge head protector Includes a 1/4" x 5 foot air hose rated at W.P. 300 PSI with 360° swivel straight safety clip-on air chuck 1/4" Female N.P.T. Range: 10 – 170 PSI in 2 lb increments. 70 – 1200 Kpa in 10 lb increments

Regular price CAD $236.20 Price $188.96

JET Tools 8 Inch 2 Or 3 Jaw Combination Gear Puller

JET Tools 8 Inch 2 Or 3 Jaw Combination Gear Puller Assemble with 3 jaws for maximum stability, or with 2 jaws where access is limited – 2 pullers in 1 Jaws, yokes and forcing screw made of heat treated Chrome Vanadium steel for ultimate strength Reversible jaw design allows internal and external pulling Jaws grip tighter as pulling force increases All components hardened to HRC 42~45 for professional use Fine-threaded 440 CrV forcing screw allows precise control...

Regular price CAD $224.10 Price $179.28

JET Tools 10 Piece Bearing Race And Seal Driver Kit

JET Tools 10 Piece Bearing Race And Seal Driver Kit Inserts bearing race and seals quickly, straight and without damaging both race and axle housings on the first try Collars fit most standard wheel bearing sizes Comes in convenient blow mould storage case Set includes: 9 Disc Sizes: 1.565, 1.750, 1.965, 2.325, 2.470, 2.555, 2.830, 2.995, 3.180" Heavy Duty Driver Handle

Regular price CAD $224.10 Price $179.28

JET Tools 30 Piece Stubby Pocket Style Razor Blade Scraper

JET Tools 30 Piece Stubby Pocket Style Razor Blade Scraper Sturdy scraper for home, auto or shop. Compact pocket size. Removes stickers, labels, paint etc. Colourful easy grip cushioned handle. Uses standard single edge razor blades (see above). H3237DA Cookie Jar Counter Display Assortment Contains 30 – mini scrapers in 5 assorted coloured handles. Cookie jar is non-breakable plastic with snap shut lid.

Regular price CAD $206.85 Price $165.48

JET Tools 3-1/2 Inch Easy Read Dashboard Gaughe Dial Tachometer

JET Tools 3-1/2 Inch Easy Read Dashboard Gaughe Dial Tachometer 0-8000 RPM 270º Sweep Illuminated Red Adjustable Set Pointer All Metal Case Wide Chrome Plated Bezel Heavy Duty Cross-Coil Meter 360º Universal Mounting Works on 12 Volt Conventional or Electronic Ignition Systems For 4, 6 or 8 Cylinder Applications Hardware and Instructions

Regular price CAD $189.60 Price $151.68

JET Tools 3-1/2 Inch Dashboard Gauge Dial Tachometer

JET Tools 3-1/2 Inch Dashboard Gauge Dial Tachometer 0-8000 RPM 270º Sweep Illuminated Red Adjustable Set Pointer All Metal Case Wide Chrome Plated Bezel Heavy Duty Cross-Coil Meter 360º Universal Mounting Works on 12 Volt Conventional or Electronic Ignition Systems For 4, 6 or 8 Cylinder Applications Hardware and Instructions

Regular price CAD $189.60 Price $151.68

JET Tools 4-1/2 Inch Bearing Seperator

JET Tools 4-1/2 Inch Bearing Seperator Separator bodies made of heat treated Chrome Vanadium steel for maximum strength All components hardened to HRC 42~45 for professional use Separators have knife like edges to get behind bearings where regular gear puller jaws are too thick to grip Can be used with push or pull type gear pullers

Regular price CAD $187.90 Price $150.32

JET Tools 11 Piece Disc Brake Caliper Tool Set

JET Tools 11 Piece Disc Brake Caliper Tool Set Used to install new rear brake pads by winding the piston back into the caliper May be used “on” or “off” the vehicle Piston retraction is completed smoothly without damaging the piston or boot Includes 9 adaptors for use on 2 and 4 wheel rear disc brake assemblies Designed for use with Mercedes®, BMW®, Volkswagen®, GM®, Audi®, Ford®, Honda®, Subaru®, Mazda®, Nissan®, Mitsubishi®, Toyota®, Land Rover®, and 4...

Regular price CAD $184.45 Price $147.56

JET Tools 18 Piece Universal Driver Set

JET Tools 18 Piece Universal Driver Set Includes most popular size drivers for proper installation of seals, bearings, bushings Ensures even distribution of force to all areas and prevents cocking Comes in convenient blow mould storage case Set includes: 12 Drivers: 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2, 1-5/8, 1-3/4, 1-7/8, 2" 1 Handle 5 Cap Screws 1 Hex Key

Regular price CAD $181.00 Price $144.80

JET Tools 14 Piece Serpentine Belt Tool Kit

JET Tools 14 Piece Serpentine Belt Tool Kit Enables rapid and easy removal and installation of belts on serpentine belt equipped vehicles Connect the tool to the spring loaded idler pulley to release the tension Fits most vehicles Comes in convenient blow mold storage case Kit includes: Serpentine belt tool with cushion grip Extension bars: 6" and 10" – for versatility and leverage Sockets: 13, 14, 15, 16, 18mm – with custom 16mm drive end to...

Regular price CAD $181.00 Price $144.80